Sponsored

MikeYQM

Well-known member
First Name
Mike
Joined
Jul 3, 2021
Threads
10
Messages
146
Reaction score
96
Location
Moncton NB Canada
Vehicles
2021 F-150 Platinum Powerboost | 2013 BMW M3 Comp
So the GWM took. This is the list of modules updated in the last few days in order. I can’t be sure that the IPMA actually took with block 4 or not, but the USB validation certainly wasn’t done. I have no further updates in FDRS. IPC is still in progress though. ABS showed an update on Monday but it’s gone and was never updated.

is there a way to verify what my IPMA software is/should be showing?


  • CCM
  • PSCM
  • CMR
  • IPMA???
  • GSM
  • TRM
  • DDM
  • PDM
  • GWM
  • IPC
Sponsored

 

FordConvert

Well-known member
First Name
Craig
Joined
Aug 11, 2021
Threads
6
Messages
135
Reaction score
169
Location
Utah
Vehicles
2021 F-150 Lariat PB 502A
Occupation
Builder
Took the truck in for TSB 22-2117 this morning. Service advisor just called saying "yeah there some issues with OTA communication but we can't figure it out and are waiting on Ford"

FDRS here I come.
 

jordandev

Well-known member
First Name
Jordan
Joined
Feb 26, 2021
Threads
7
Messages
180
Reaction score
84
Location
Canada
Vehicles
2021 F150 XLT 302A (on order...)
Having another issue now.... so here is what I did from the beginning:

started at stuck 1.7.1, revision 144

1 - GWM - usb. success, horn/lights showed up in fordpass
2 - APIM - usb. success - sync revision went from 144 to 244. can schedule updates multiple days now
3 - TCU - usb. success, then fdrs stuck on final config step, but then fine
4 - GWM - failed right away (before usb etc). then the update disappeared... ? but all green, no DTCs, and everything else looking good, so continuing...
5 - DDM - no usb. success
6 - PDM - no usb. success

Now all I have is these 4 left and Download gives an error (also no modules listed as fully updated in the bottom right anymore?):

Ford F-150 ECU module programming guide using FDRS 1648243726897


All my modules are green. My wifi is fine. Is FDRS down? Is something else broken on my end? Have restarted FDRS etc...
 
Last edited:

JasonATL

Well-known member
First Name
Jason
Joined
Jan 19, 2021
Threads
4
Messages
140
Reaction score
78
Location
Atlanta
Vehicles
2021 F-150 Platinum
I’m getting the error trying to download as well. Seems the ford servers are down or having an issue. ☹
 

MikeYQM

Well-known member
First Name
Mike
Joined
Jul 3, 2021
Threads
10
Messages
146
Reaction score
96
Location
Moncton NB Canada
Vehicles
2021 F-150 Platinum Powerboost | 2013 BMW M3 Comp
I just got a login loop. Restarted FDRs and seemed to work. Downloading ok it seems
 

Sponsored

MikeYQM

Well-known member
First Name
Mike
Joined
Jul 3, 2021
Threads
10
Messages
146
Reaction score
96
Location
Moncton NB Canada
Vehicles
2021 F-150 Platinum Powerboost | 2013 BMW M3 Comp
I just installed the APIM for 22028 358 and the GWM is installing now. At which update should I see BC stuff?

I know there are more after this GWM that will pop up, but seeing BC stuff show up will be a good status confirmation.
 

Jesse-Infotainment

Well-known member
First Name
Jesse
Joined
May 27, 2021
Threads
7
Messages
3,697
Reaction score
5,847
Location
Dallas
Vehicles
2021 F150
I just installed the APIM for 22028 358 and the GWM is installing now. At which update should I see BC stuff?

I know there are more after this GWM that will pop up, but seeing BC stuff show up will be a good status confirmation.
APim - 21281, Gateway, APim -22034
 

jordandev

Well-known member
First Name
Jordan
Joined
Feb 26, 2021
Threads
7
Messages
180
Reaction score
84
Location
Canada
Vehicles
2021 F150 XLT 302A (on order...)
Yes downloads are back now thanks. GWM update is back now too.

But I get an error,

ignition on step it communicates fine, ignition off it gives a comm error

Ford F-150 ECU module programming guide using FDRS 1648246043725


happens with either a GWM update or a config. have tried a dozen times. I'm still connected fine otherwise.
 

Jesse-Infotainment

Well-known member
First Name
Jesse
Joined
May 27, 2021
Threads
7
Messages
3,697
Reaction score
5,847
Location
Dallas
Vehicles
2021 F150
Leave ignition on.
 

Sponsored


jordandev

Well-known member
First Name
Jordan
Joined
Feb 26, 2021
Threads
7
Messages
180
Reaction score
84
Location
Canada
Vehicles
2021 F150 XLT 302A (on order...)
Leave ignition on.
Thanks. Yep tried just leaving it on when it tells me off but same problem comm error

GWM update has dissapeared again so can't try again now. Something odd going on.
 

Jesse-Infotainment

Well-known member
First Name
Jesse
Joined
May 27, 2021
Threads
7
Messages
3,697
Reaction score
5,847
Location
Dallas
Vehicles
2021 F150
Sounds like it. I was doing something and was having the issue with downloading. Send me you vin and let me see if I can see the gateway update
 

MikeYQM

Well-known member
First Name
Mike
Joined
Jul 3, 2021
Threads
10
Messages
146
Reaction score
96
Location
Moncton NB Canada
Vehicles
2021 F-150 Platinum Powerboost | 2013 BMW M3 Comp
I’m all out of updates. Currently at APIM 22034 354 and all modules green.

I did get a ford pass blue cruise active notification.

My Sync screen does not show any blue cruise information.

my driver assistance settings don’t show anything to enable blue cruise.
Any ideas?
 

ksimon123451

Well-known member
First Name
Kelly
Joined
Mar 22, 2022
Threads
1
Messages
77
Reaction score
57
Location
Florida
Vehicles
21 F150 Lariat
Yes downloads are back now thanks. GWM update is back now too.

But I get an error,

ignition on step it communicates fine, ignition off it gives a comm error

1648246043725.png


happens with either a GWM update or a config. have tried a dozen times. I'm still connected fine otherwise.
I was having the same issue, I waited till the next day and it started working. I think your truck needs to report to the mother ship that it is good to go.
 

MikeYQM

Well-known member
First Name
Mike
Joined
Jul 3, 2021
Threads
10
Messages
146
Reaction score
96
Location
Moncton NB Canada
Vehicles
2021 F-150 Platinum Powerboost | 2013 BMW M3 Comp
Never mind. Rebooted the APIM and it all
Popped up! Thanks all!
Sponsored

 
 




Top