Those two part number are for the LEDs that are just ice blue. They don’t change color. I know cause I have them just a heads up. I don’t know if that’s what you wanted.
I got one of those LED harnesses for the drivers door today and it figures I got it for a good price, but it was the wrong one. It was in the right packaging. It came opened. I have to call them and send it back but when I was investigating it, it has a different part number tag That normally comes in that package and looking at the LED. It’s the small single LED not the big square one which indicates color change. On the bright side, I ordered from another company brand new all the other LED harnesses.Did you scroll down far enough ?
I got one of those LED harnesses for the drivers door today and it figures I got it for a good price, but it was the wrong one. It was in the right packaging. It came opened. I have to call them and send it back but when I was investigating it, it has a different part number tag That normally comes in that package and looking at the LED. It’s the small single LED not the big square one which indicates color change. On the bright side, I ordered from another company brand new all the other LED harnesses.
That's what I ordered. However, the UPS tracking number shows the box at 21 pounds, which seems odd.
that looks awesome!2023 F-150 Tremor 402A package. So I ordered one FL3Z harness, the rear passenger, just to make sure everything work as I needed it to. Went into Forscan and made changes in APIM, BCM was already coded for Ice Blue and Red. Removed panel, plugged in new light harness and shut door. Started the truck, enabled parking lights so ambient lights would be on. Ice blue light in both spots. Then opened door and switched to red. Excellent!!
Hooked everything back up, put paneling back on, waited for night to take the pics, lol. Got the other 3 harnesses on the way.
@252Tremor5oh2023 F-150 Tremor 402A package. So I ordered one FL3Z harness, the rear passenger, just to make sure everything work as I needed it to. Went into Forscan and made changes in APIM, BCM was already coded for Ice Blue and Red. Removed panel, plugged in new light harness and shut door. Started the truck, enabled parking lights so ambient lights would be on. Ice blue light in both spots. Then opened door and switched to red. Excellent!!
Hooked everything back up, put paneling back on, waited for night to take the pics, lol. Got the other 3 harnesses on the way.
Yes, I had the single dot light in the cubby under the armrest. Had the open slot in the lower cubby for the nonexistent second light.
