Chip hold My22 & My23

[Blackout150]

Starting this thread to see which builds and which weeks are affected by this chip hold. I know the dates could be earlier and possibly later. Would also be a good thread to see who is making progress.

I have a 502A powerboost. Was in the build week of 8/8. Was put on chip hold 8/25. Will update when I get some information

Sponsored

 

[Kodiak]

starting this thread to see which builds and which weeks are affected by this chip hold. I know the dates could be earlier and possibly later. Would also be a good thread to see who is making progress.

I have a 502A powerboost. Was in the build week of 8/8. Was put on chip hold 8/25. Will update when I get some information

Dang that sucks. Hopefully it will be short term. Your truck and mine are similar too. Mine has a blend date of 8/30.

 

[Beercity]

Adding on to this tracking.
For those of you monitoring your as built data, if you move to built or shipped can you check to see if your tear tag or vehicle data changed once you get the new status.
Would be great if the tag or vehicle data changes so I don't have to scroll down to 716 then jump to the 721 modules while I wait for my 720 modules.
I would assume it has to update the list as that is how you reset your modules if something goes awry from updates or Forscan.

 

[Jesyvut]

Blend date was 7/15 - Limited PB. I have a tear tag and all modules populated but I am on chip hold.

 

[BigGuy2851]

What is a tear tag?

 

[Blackout150]

What is a tear tag?

It’s on the top of your module page

 

[BigGuy2851]

My blend date was 7/15 also. All modules populated and on chip hold.....
Plat
BAP

 

[dearbornboy]

Blend date 7/26
On chip hold, 2.7 , BAP , 360 copilot 2.0
Spray in bed liner

No updates since7/26 but now I'm showing my truck was sent off-site as of yesterday

 

[BigGuy2851]

Yes I have one
What does it mean?

 

[Blackout150]

Dang that sucks. Hopefully it will be short term. Your truck and mine are similar too. Mine has a blend date of 8/30.

It looks like the later builds might be getting them but who knows.

 

[Mtnman1]

Blend date was 7/15 - Limited PB. I have a tear tag and all modules populated but I am on chip hold.

.....apparently not "all". Have to be missing some. Or you are on quality hold, not chil hold

 

[Blackout150]

I believe it means that the programming phase of modules is done unless of course you are missing some. They still post it even if your on chip hold. Have had my tear tag for a couple weeks

 

[Blackout150]

.....apparently not "all". Have to be missing some. Or you are on quality hold, not chil hold

I do like chil hold better then chip hold

 

[Mtnman1]

I do like chil hold better then chip hold

But not as good as chilli hold.

 

[Blackout150]

For those of you that have not seen this article this is the super duty’s in KC. Assume this is similar to our F150s. https://www.thedrive.com/news/growi...utm_medium=syndication&utm_source=msnarticles

Sponsored