Bronze wheels suggestions?

[MJG44]

In search of 22s Street style, not offroad.
Forged would be fine, budget not necessarily the main deciding factor.

Anything that's out there in our bolt pattern besides Ferrada, Vossen, Velgen?
Hoping to not have a 10" width, prefer a 9.5". Find with the +30 offset the 10" have too much poke.

Suggestions welcome!

Sponsored

 

[Davidwnuc]

Forgestar X14 is the closest i can think of. they only come in 10” wide though. i looked for bronze wheels for awhile but couldn’t find exactly what i wanted. i considered having wheels powder coated but the cost just adds up that way.

 

[MJG44]

I was even thinking about powdercoating my 24" Niche but I think in bronze it would just be TOO much. I think a nice forged bronze 22" would be perfect.

 

[MJG44]

So the thing is with the limited selection I do like 2 Vossen style BUT even the 22x9.5 and 22x10 are at most +25. Not a huge deal breaker vs the 22x10+30 but I just don't like too much poke as it is with the +30.

I'm looking more and more into the Forgestar and their 22x10+30 with the fact they are only 29 lbs.
Right now my Ford Performance 22x9.5+44 are from what I read somewhere between 45-50 lbs per.
My 24x10+30 Niche are 49 lbs per.

I ran my FP 22s for a brief time during summer with 285/45 and found the sidewall a bit tall and didn't like the look. My 24s I run 295/35 which helps with the poke look vs 305 as I had the 305s on for a bit with my 23x10 Saleen wheels.

I'm really thinking to go Forgestar with 285/40r22 which should get me pretty well where I want to be without getting custom for minor offset adjustment.

I have a '22 Expedition and the wheels are interchangeable so with the Forgestar that's 5 sets of wheels between them total.

....yes, I'm aware I have a bit of a wheel problem

Sponsored