BEDRUG Releases 2021 Ford F-150 Liners and Mats

[mmcconnell810]

I really like the way bedrugs look and work, this is my truck.

Sponsored

 

[ThunderBubba]

I have a full BedRug in my 98' F150. It is a great product but the install is VERY important. My installer did a so-so job (didn't use enough velcro in crucial areas on the side and tailgate) Also, if you plan to do a lot of hauling where you would use a shovel to unload things such as dirt or gravel this is not the best liner to go for. And debris really collects in the fold between bed and tailgate. In my opinion these should have been 2 separate pieces not one seamless.

 

[sbreech]

I just finished installing the Bed Rug in my '21 5.5' bed F150. The installation was fairly simple, and took a little over an hour. There is a LOT of velcro holding this thing in place.

 

[Jus Cruisin]

I just finished installing the Bed Rug in my '21 5.5' bed F150. The installation was fairly simple, and took a little over an hour. There is a LOT of velcro holding this thing in place.

You'll want to get the filler between bed and tailgate to fold up not down. That way you won't create a bind because it's wadded up when the tailgate is closed.

 

[Seawolf]

I really like the way bedrugs look and work, this is my truck.

I was about to post this video. As soon as my truck comes in, I am heading over to C&H for this Bedrug install. I want the Retrax Pro XR cover.

 

[BHunted1]

I was about to post this video. As soon as my truck comes in, I am heading over to C&H for this Bedrug install. I want the Retrax Pro XR cover.

I did both of those myself. Not hard. But make sure to bring a pillow. It's comfy enough that you'll want to take a nap.

 

[kmayer]

I was about to post this video. As soon as my truck comes in, I am heading over to C&H for this Bedrug install. I want the Retrax Pro XR cover.

Just installed both last week. Love them So far. Also installed swing boxes.

 

[Bdubbs1198]

Installed mine a month or so ago. Longest time is just making all the cuts and trimming some backing to get thr switch and lights to click back in.

 

[GABAR]

L

Installed mine a month or so ago. Longest time is just making all the cuts and trimming some backing to get thr switch and lights to click back in.

Looks good.
The time spent not rushing and making the proper cuts is well worth the final results.

 

[BHunted1]

L

Looks good.
The time spent not rushing and making the proper cuts is well worth the final results.

They are already marked on back by manufacturer. Just have to cut them out where needed. Looks like he did a nice job and laid them under the bezels.

 

[euchre_u]

Has anyone found any “deals” on Bed Rugs? One site sponsor here had a “Labor Day” sale, but I was wondering if there were any current deals out there. Thanks in advance . . . .

 

[Jack Miter]

I really like the way bedrugs look and work, this is my truck.

I like this guy... "We took the time to do it right". What a novel idea.
Great job!

 

[Str8Shooter]

What is the best way to remove the LED lights, switch, and Pro Power panel without breaking anything? I'd like to install a bedrug just like bdubbs1198 did his. Would greatly appreciate instructions.

 

[Microday]

What is the best way to remove the LED lights, switch, and Pro Power panel without breaking anything? I'd like to install a bedrug just like bdubbs1198 did his. Would greatly appreciate instructions.

this lights and switch have the locking tab on the bottom, just insert a panel tool or screwdriver.. for the pro power I removed the 4 bolts and then took the panel apart and disconnected the wiring connectors. Then cut the rug and reassembled. The pro panel has two guide pins on each side of the box that you will need to cut the carpet for.

I left as much carpet as possible and used an awl tool for making holes.

 

[Revz]

What is the best way to remove the LED lights, switch, and Pro Power panel without breaking anything? I'd like to install a bedrug just like bdubbs1198 did his. Would greatly appreciate instructions.

The key is removing the tail lights so you can access the retainer clips and plugs. There's a great how-to here:

Sponsored