Are these display items we can enable? Average Speed and RPM?

[Big Cam]

So I am venturing out into the unknown and looking for things to change besides the standard stuff that everyone else already knows about.

Am I reading this correctly since it is in the Instrument Panel Cluster section? Are these things we can enable?
Average Seeed
Average RPM

My stock entry is a 0, everything disabled.

				Avg Spd RPM (ASRPM) • Avg Spd Display (ASD) • AWD Gauge Feature (AWDGF) • Eco Speed Control (ESC)
720-01-01	xxxx	x*xx	xx--	0 =	ASRPM disabled • ASD disabled • AWDGF disabled • ESC disabled		8 =	ASRPM enabled • ASD disabled • AWDGF disabled • ESC disabled
				1 =	ASRPM disabled • ASD disabled • AWDGF disabled • ESC enabled		9 =	ASRPM enabled • ASD disabled • AWDGF disabled • ESC enabled
2 =	ASRPM disabled • ASD disabled • AWDGF enabled • ESC disabled		A =	ASRPM enabled • ASD disabled • AWDGF enabled • ESC disabled
3 =	ASRPM disabled • ASD disabled • AWDGF enabled • ESC enabled		B =	ASRPM enabled • ASD disabled • AWDGF enabled • ESC enabled
4 =	ASRPM disabled • ASD enabled • AWDGF disabled • ESC disabled		C =	ASRPM enabled • ASD enabled • AWDGF disabled • ESC disabled
5 =	ASRPM disabled • ASD enabled • AWDGF disabled • ESC enabled		D =	ASRPM enabled • ASD enabled • AWDGF disabled • ESC enabled
6 =	ASRPM disabled • ASD enabled • AWDGF enabled • ESC disabled		E =	ASRPM enabled • ASD enabled • AWDGF enabled • ESC disabled
7 =	ASRPM disabled • ASD enabled • AWDGF enabled • ESC enabled		F =	ASRPM enabled • ASD enabled • AWDGF enabled • ESC enabled

Sponsored

 

[powerboatr]

i remember something somewhere in a setting that gave us avg speed,
but for the life of me i cant remember where it was

thinking it was in the setting menu in the IPC cluster. but dont take my word as gospel

 

[Big Cam]

i remember something somewhere in a setting that gave us avg speed,
but for the life of me i cant remember where it was

thinking it was in the setting menu in the IPC cluster. but dont take my word as gospel

That's the section I have listed above. I just wasn't sure if I was reading that right or where it would display.

 

[powerboatr]

That's the section I have listed above. I just wasn't sure if I was reading that right or where it would display.

yes i see that, but i am sure i read somewhere we could set the ipc display to show average speed, but ..i cannot remember where or if it was in my 21 super duty. i think it was in the super duty
settings that had it under the truck info screen you could see average mph

i dont know why or how we can do it in the 150. but it looks doable , not sure where it would display

not much help am i today

i think some of our forscan gurus would be the shell answer man

2020-2021 sync 3 super duty
yup it was in my super duty spreadsheet
Adds Average Speed to Trip/Fuel Menu IPC 720-01-01 xxxx x4xx xx--

Sponsored