all red blis/led tails

[tc429]

was never a big fan of amber turns, white lenses... put lamin-x red film on, bought male/female 12 pin plugs to move stuff around- brakes are still center lights, but turns are now both the old amber top and old white backup bottom lights... reflector pattern is a little different, but white/amber show thru the red tint similar...small 'bolt' style LEDs by trailer hitch for backups... just something a little different, and reversible by just peeling off and removing adapter plugs- except for two small holes in bumper plastic

Sponsored

 

[thebigdu]

was never a big fan of amber turns, white lenses... put lamin-x red film on, bought male/female 12 pin plugs to move stuff around- brakes are still center lights, but turns are now both the old amber top and old white backup bottom lights... reflector pattern is a little different, but white/amber show thru the red tint similar...small 'bolt' style LEDs by trailer hitch for backups... just something a little different, and reversible by just peeling off and removing adapter plugs- except for two small holes in bumper plastic

Looks good with the red. I personally wouldn't do it because I like the reverse lights where they are, but you could probably sell the harnesses that you made for yourself for those willing to install the separate reverse lights.

I'll probably do a light tint on the white part like lots of members here and just hope it doesn't dim the turn signal, brake light, and reverse light output too much. Ram and Chevy/GMC are definitely better at making a sporty/sleek looking tail light; theirs both come "smoked" from the factory.

 

[SpaceWhiteF150]

was never a big fan of amber turns, white lenses... put lamin-x red film on, bought male/female 12 pin plugs to move stuff around- brakes are still center lights, but turns are now both the old amber top and old white backup bottom lights... reflector pattern is a little different, but white/amber show thru the red tint similar...small 'bolt' style LEDs by trailer hitch for backups... just something a little different, and reversible by just peeling off and removing adapter plugs- except for two small holes in bumper plastic

Can you post a pic of where you put the reverse lights?

 

[tc429]

Can you post a pic of where you put the reverse lights?

they are just 'lighted bolts' - had thought about putting 4 on the license plate bolts, but theyre 5/16-8mm woulda been a royal pain to put plate on/off as theyd need rewired- plus no room behind for depth or access...theyre bright little things- zone lighting is not as bright as originals as they are more spot than diffuse out the corners... top pic theyre hard to see but they are inline with the license plate bolts but in the lower lip of the bumper

Sponsored