22 Space White Lariat 4x4

[thebigdu]

Thinking of changing my "sport" decals to the BAP 4x4 ones. Let me know what you think.

I have the Sport and didn't love it at first, but it's grown on me. IMHO, it's a little sleeker than the 4x4 solo. Your truck looks great... Don't fix it it it ain't broke!

Sponsored

 

[nezff]

I have the Sport and didn't love it at first, but it's grown on me. IMHO, it's a little sleeker than the 4x4 solo.

I didnt either. I hated it before getting the truck. I was just thinking since I went BAP heads, tails, and emblems, why not BAP decals.

 

[Graygoose2021]

Leave Sport, think they look better.

 

[nezff]

Has anyone had to remove this trim piece? I'm chasing a rattle which is coming from either of these two pieces which sound like they are rubbing together. @dolsen and I chatted but he wasnt totally sure which one comes off first.

 

[JohnMcClane]

Do you hear the rattle while driving? Tried folding up a microfiber a few times and wedging it in there to confirm it’s def one of those two pieces?

 

[nezff]

Do you hear the rattle while driving? Tried folding up a microfiber a few times and wedging it in there to confirm it’s def one of those two pieces?

Yes. I'll try that. It sounds like the whole thing is doing it.

 

[JCM]

Has anyone had to remove this trim piece? I'm chasing a rattle which is coming from either of these two pieces which sound like they are rubbing together. @dolsen and I chatted but he wasnt totally sure which one comes off first.

I've got creaking from the same area. I have had the trim piece off for a different reason and was unable to resolve the noise just by firmly clipping it back in (will be trying some foam/damping material behind it next).

I don't know if the order matters, but I'd start with the lower piece which goes all the way across to your push button start. Work it across and it pops off pretty easily with trim tools. Then the upper piece can come off after.

 

[nezff]

I've got creaking from the same area. I have had the trim piece off for a different reason and was unable to resolve the noise just by firmly clipping it back in (will be trying some foam/damping material behind it next).

I don't know if the order matters, but I'd start with the lower piece which goes all the way across to your push button start. Work it across and it pops off pretty easily with trim tools. Then the upper piece can come off after.

I hate to take that whole piece off if I can just get the other piece off.

 

[nezff]

spoke with local ford dealer where I bought the truck. They said they could install my motofab 1.5 level for roughly $330ish. I asked about any problems with lane centering cruise etc... and guy said they have to recalibrate occasionally. Usually over 2 inches.

 

[nezff]

Anyone have these? Lariat wheels OEM in gloss black.
I kinda like em!

 

[nezff]

To finish off the BAPish conversion: debating on how far to go with it. Interior is only issue that wouldn't change.

Wheels black, lariat grille black, and oem lariat fender badge bap.

 

[SpaceWhiteF150]

That will look amazing! Maybe look into venomrex 20” wheels!

 

[nezff]

That will look amazing! Maybe look into venomrex 20” wheels!

I like the stock wheels, just black.

 

[nezff]

This thing is hard to photograph with dark wheels.

 

[harry brown]

Love it ! looks nice

Tutuapp 9Apps Showbox​

Sponsored