2025 - How to Add SecuriCode

[F150Fordzilla]

My 25 KR has it installed below the door handle and to be honest I want to remove it but not sure how other than taking fishing line to cut thru the double sided tape holding it on there. I didn’t pay for it or order it but the dealer put it on my truck. Haven’t used it since the ford pass app came out to lock and unlock it from my phone.

Sponsored

 

[DD519]

Have you tried the installation yet? I'm looking at doing this myself, and would like to see at least a second person on the thread having success. I spoke to my dealer and the parts and service guys there said they had not been able to get the 24MY parts to work (but I only talked to the parts guy, so I don't know exactly what the service folks tried or didn't try.) I read that the stick-on keypads from prior years don't work, which I don't care about because I'm looking for the factory installed version that this thread details. Maybe the dealer only tried stick-on parts...

My 25 KR has it installed below the door handle and to be honest I want to remove it but not sure how other than taking fishing line to cut thru the double sided tape holding it on there. I didn’t pay for it or order it but the dealer put it on my truck. Haven’t used it since the ford pass app came out to lock and unlock it from my phone.

you can use a hair dryer or carefully using a heat gun to warm the adhesive up to remove the keypad. Then you could use an adhesive remover wheel to get rid of the residue

 

[F150Fordzilla]

I’m going to try the hair dryer trick this weekend.

 

[LN7]

Have you tried the installation yet? I'm looking at doing this myself, and would like to see at least a second person on the thread having success. I spoke to my dealer and the parts and service guys there said they had not been able to get the 24MY parts to work (but I only talked to the parts guy, so I don't know exactly what the service folks tried or didn't try.) I read that the stick-on keypads from prior years don't work, which I don't care about because I'm looking for the factory installed version that this thread details. Maybe the dealer only tried stick-on parts...

Hope to do the install in the next week or so - will report back.

 

[WalterMitty]

My 25 KR has it installed below the door handle and to be honest I want to remove it but not sure how other than taking fishing line to cut thru the double sided tape holding it on there. I didn’t pay for it or order it but the dealer put it on my truck. Haven’t used it since the ford pass app came out to lock and unlock it from my phone.

You could also just park it in the hot sun some day and it will work that way too. At least that worked for my lame "Tremor" stickers on both sides of the bed.

 

[WalterMitty]

Hello to all. I just joined the forum and had a couple of questions regarding this mod. I have a new king ranch on the way and I have definitely loved my keypads over the years. New kr’s don’t have an ignition key , just fobs and a push button. So what’s the procedure for getting the factory secure code number with fob’s? Also could you add some specifics about the code changes in forscan ? Pictures and tutorial was excellent.

Check out this video if you haven't already. Your code might also be on sticker on your truck.

 

[bigfish]

Well I got my parts and my OBD link. Now all I need is a new truck and a lot of nerve to learn forscan.

 

[KevinP]

Have you tried the installation yet? I'm looking at doing this myself, and would like to see at least a second person on the thread having success. I spoke to my dealer and the parts and service guys there said they had not been able to get the 24MY parts to work (but I only talked to the parts guy, so I don't know exactly what the service folks tried or didn't try.) I read that the stick-on keypads from prior years don't work, which I don't care about because I'm looking for the factory installed version that this thread details. Maybe the dealer only tried stick-on parts...

I did this on my 25 platinum a few weeks ago with no issues at all. If you are moderately handy it’s about an hour or two job and parts were under $130 shipped.

 

[bigfish]

Well I took delivery and my new king ranch is now home. I will be attempting this modification today. Really nervous about forscan. Totally unconcerned about keypad installation. I’ll be back with a report.

Question for DD519. When pressing the 8/9 combination to lock the doors, do the mirrors automatically fold ?

 

[DD519]

Well I took delivery and my new king ranch is now home. I will be attempting this modification today. Really nervous about forscan. Totally unconcerned about keypad installation. I’ll be back with a report.

Question for DD519. When pressing the 8/9 combination to lock the doors, do the mirrors automatically fold ?

Yes, if you have the auto mirror fold function enabled, it will fold once you press 7/8 & 9/0

 

[julch]

Like you, I have a ‘25 KR…. Can you let us know how your install and forscan experience goes? I’m very tempted to do what you’re doing. Ty!

 

[bigfish]

So the physical installation is complete. I’m having trouble getting my license from forscan. I’m gonna retry this morning and see if I can’t figure it out. The job was simple enough. My R and R was exactly as described by the op. Snaking the wire down the right way in the door took me a while to get right. Two and a half hours total time but that was at least a half hour trying to route the harness correctly… it just fought me

 

[roadPilot]

I’m having trouble getting my license from forscan. I’m gonna retry this morning and see if I can’t figure it out.

Are you trying to get the free 2 month trial version or the 1 year paid version?

If the free one, be sure to read the instructions on the screen. You DON'T get an email telling you to go get it. You have to remain on that screen and just refresh it after ~30 minutes:

As soon as the form is filled and submitted, the process of Extended License generation will be started. The process may take some time, usually up to 30 minites. The Extended License key will NOT be sent by email. Instead, you will be able to download the license key on this page as soon as the generation process is completed, by reloading the result page or by resubmitting the form using the same data.

P.S. - Good job on the physical install. I may be trading the '21 F150 in for a '25 F350, so I'll have to tackle this as well.

 

[bigfish]

Thanks for the input I was waiting for an email. Got that issue sorted now working on finding the key in my files which Livinitup tells me is difficult in forscan. Tomorrow morning I feel like I’ll be ready to tackle my first forscan code change (fingers crossed)

 

[digitaltrucker]

Thanks for the input I was waiting for an email. Got that issue sorted now working on finding the key in my files which Livinitup tells me is difficult in forscan. Tomorrow morning I feel like I’ll be ready to tackle my first forscan code change (fingers crossed)

Did you get any kind of paperwork with the one you bought?

Sponsored