2022 Level Kit

[Zengineer]

I wish someone could help me 22 platinum 6 1/2 foot bed max tow package I’m not changing the tires out I would really like to level or bring within 1 inch of level the rear end I really don’t wanna level up is there something I can do that’s not gonna screw shit up

You can easily take the rear down by 1.25 inches at the axle by taking out the 4x4 spacer blocks. That won't get you to a single inch of rake but is as far as I'll ever go. To my eye, once you get to around an inch it looks nose high.

Sponsored

 

[Csvt18]

Exactly an inch of rake……looks like more from this pic. 2.5” level.

 

[ChuckingLead]

Hi all,
New here. I'm getting my 2022 F150 Lariat at the end of the month and still haven't found a level kit that is approved for 2022 yet. Dealership offered pucks. But I am looking to go with Bilsteins. Unfortunately the dealership said they don't have a part number for any coil overs for 2022 yet.
Does anyone have any insight?
Have you leveled a 2022? If so, what did you do?
Thanks

I installed the Icon 0-2.75" 2.5 VS RR CDCV COILOVER KIT On the front part #91823C with Icon Rear Shocks part #97720p

 

[9663mu]

But I have noticed more then ever every truck is a little different. My Falcon shocks gave me 2.5 in of lift but still left me about 1.5 of take.

 

[J-C]

In discussions with Bilstein, the aftermarket group knows nothing of this.
I was told by them "fake news"

Seems the "fake news" has become reality:
https://performanceparts.ford.com/part/M-18000-F15B

 

[Another Ford]

Seems the "fake news" has become reality:
https://performanceparts.ford.com/part/M-18000-F15B

That is very interesting. They must have had a Covid cramp back then.
I certainly would have opted for that setup!

 

[Csvt18]

I installed the Icon 0-2.75" 2.5 VS RR CDCV COILOVER KIT On the front part #91823C with Icon Rear Shocks part #97720p

What size wheels and tires? I like the sidewall in those. A lot of meat.

 

[ChuckingLead]

35x12.5 r17 on KMC 17x8.5 18mm off set

What size wheels and tires? I like the sidewall in those. A lot of meat.

 

[Graygoose2021]

But I have noticed more then ever every truck is a little different. My Falcon shocks gave me 2.5 in of lift but still left me about 1.5 of take.

Readylift told me it looks that way, since 21's have a larger rearwheel opening than before. Check level, with a small level below the doors on the pinch welds. See if your level. The wheels make it "look" unlevel.

 

[KTM753]

Readylift told me it looks that way, since 21's have a larger rearwheel opening than before. Check level, with a small level below the doors on the pinch welds. See if your level. The wheels make it "look" unlevel.

Thanks for posting this. I thought my stock suspension looked ridiculously high in the rear. Now I know why.

Sponsored