15-20 Fox 2.0 Leveling Lift Kit installed on 2022 PowerBoost F-150

[nrmedic]

Installed the ‘15-‘20 Fox 2.0 Level today. Only hand tools and a floor jack, super simple, only three hours. Only 1/2” of rake now, just have to see where it settles out at. The new ride though, like butter! No more getting throttled around! Special thanks to Frank @Stage3Motorsports for recommending this kit.

Sponsored

 

[HANCOCK]

Nice-looking truck .Did you have any problems with the high voltage cables on the passenger side?
thanks rob

 

[LCMM55]

Does it need a wheel alignmenet after the install?

 

[SpaceWhiteF150]

Does it need a wheel alignmenet after the install?

Always!

 

[Jimi]

Installed the ‘14-‘20 Fox 2.0 Level today. Only hand tools and a floor jack, super simple, only three hours. Only 1/2” of rake now, just have to see where it settles out at. The new ride though, like butter! No more getting throttled around! Special thanks to Frank @Stage3Motorsports for recommending this kit.

I REALLY like your color

 

[mxwrk]

Nice-looking truck .Did you have any problems with the high voltage cables on the passenger side?
thanks rob

I have the same setup as him and can confirm this kit works fine without bothering the high voltage cables. There is no external reservoir hose coming out of this shock.

 

[fmdog44]

Installed the ‘14-‘20 Fox 2.0 Level today. Only hand tools and a floor jack, super simple, only three hours. Only 1/2” of rake now, just have to see where it settles out at. The new ride though, like butter! No more getting throttled around! Special thanks to Frank @Stage3Motorsports for recommending this kit.

ba-ba-ba-bad to the bone!!

 

[PwrboostedF150]

I also have the same fox kit. This picture is after it settled.

 

[TXGREEK]

Installed the ‘14-‘20 Fox 2.0 Level today. Only hand tools and a floor jack, super simple, only three hours. Only 1/2” of rake now, just have to see where it settles out at. The new ride though, like butter! No more getting throttled around! Special thanks to Frank @Stage3Motorsports for recommending this kit.

I as well have this kit as well as the Fox Elite Performance piggies in the rear and replaced rear block with a 2” block to keep a bit more rake. Running Toyo AT3’s 295/65/20’s on my 23 5.0 Lariat FX4 Super Crew.

 

[GIjoe]

I as well have this kit as well as the Fox Elite Performance piggies in the rear and replaced rear block with a 2” block to keep a bit more rake. Running Toyo AT3’s 295/65/20’s on my 23 5.0 Lariat FX4 Super Crew.

Curious to see a pic with the new rear block

 

[TXGREEK]

Curious to see a pic with the new rear block

Here ya go

 

[GIjoe]

Here ya go

Haha sorry I meant to ask for a side pic of the truck. I want to see how the added rake looks. Thanks for a quick reply!

 

[Groovicles]

Installed the ‘14-‘20 Fox 2.0 Level today. Only hand tools and a floor jack, super simple, only three hours. Only 1/2” of rake now, just have to see where it settles out at. The new ride though, like butter! No more getting throttled around! Special thanks to Frank @Stage3Motorsports for recommending this kit.

Man, your truck looks good. If you're able can you share your thoughts on how the level affected MPG on your PB?

 

[nrmedic]

Nice-looking truck .Did you have any problems with the high voltage cables on the passenger side?
thanks rob

Rob, none at all. You can gently pry on the bracket with a small pry bar to get access with a ratchet wrench.

 

[nrmedic]

Man, your truck looks good. If you're able can you share your thoughts on how the level affected MPG on your PB?

My mileage has always varied based on my driving. My day to day is back and forth to work with some mild city driving. However, we also use this as the family vacation rig and it see's a lot of highway too. My personal best was going down I-77 from Galax VA to Charlotte NC, I averaged just over 31mpg. You can see my current trend has been going down with a wheel and tire change. I took off the factory Good years for some Falken AT3w's in the 285/65R18 flavor, but still SL load range, so they're about the same weight as factory. Then I transitioned to Fuel Vectors, 18x9 +20. Thus far the leveling kit has maintained the 1/2" rake, but it's only been three hundred miles. I'll need to due a few fuel ups to trend data, but overall I cannot complain. Life of the truck is 23.1mpg running 93 E10.

Sponsored