Search results

Much appreciated. I think .5" threaded on top and bottom of the link may not be enough, but if steeda says it's ok then maybe it is. I'm kind of wary of the appearance only because the bar is a silver color, so if I can get a more tucked up look that would be better. Btw my truck is 4wd but...

Is your truck a 4wd? Are you basically saying that the steeda 2wd bar will fit a 4wd truck just fine even without removing the block spacers?

So I got the Dometic Console fridge installed in my truck and I must say, it is a true luxury to behold. I can probably count on one hand the number of vehicles that come with a fridge in the center console, so it's pretty special. A special thanks to Rineland for the advice on this fridge...

STX grilles going for almost $1k on ebay. Lariat sport BAP grilles going for $200. Money talks.

Thanks to Rineland for making me check my console again. There is a 12v socket in my power boost lariat, but someone had put a USB charger in it so I guess I didn't notice it.

I always wanted the dometic console fridge in my old 2015 502A lariat. But by the time I realized it was available, my truck was already at 100k miles so I wouldn't have much benefit. Finally stumbled on this post and now there's hope! Can't wait to get it for my lariat power boost! My only...

Hey all, After about 700 miles both front and rear have settled about .5" on my powerboost. I was hoping for some rake, but I shouldn't complain I guess, the result was a perfect level with no payload. Hopefully this helps all of you with the same problem of upgrading shocks on a powerboost...

My before measurements were 37.25" in front and 39.75" rear. The new measurements right after install (without driving it around to settle the suspension) are 39.5" front and 39.75 rear. So a little more than advertised using the 2" setting on the 5100s in front. Hopefully it settles because I...

Here's my before photo. Sorry I should have taken measurements but I forgot to. I'll ask the shop to take them, hopefully they can do it before they install the shocks. Everything is stock currently. There is about 250lbs of load on the rear from the cover and some tools.

I'm in the same boat. I've got a PB with an appointment tomorrow to install 5100s in front and 5160s in back. I do want some rake because I'm driving with a load mostly. I'm planning to match your same setting at 2". I'll post back here to see if I get the same result.

Just got through reading all these posts and glad I'm not alone in this... I visited my local LineX who installed the Bak Mx4 on my short bed, and told them I wanted a t bar rail. I showed them the install guide for the elevate rails and they said it may work, but it may be tight on the...

Part of me thought that was what you were suggesting... not sure how easy it is to open up the outlets on both ends, but the wiring seems simple enough. I'll take a look at a service manual on how to open up the outlets. Thanks for the suggestion, this sounds less risky than the Forscan...

Correct, but all my tools are in the bed of the truck, it would be more convenient to grab the batteries from the bed as well. I also have a tri-fold tonneau cover, so I'm not worried about the outlets being exposed. More concerned about people stealing my tools. I've looked into mounting a...

Thank you all for your work on Forscan, especially Livinitup. My first post here, but I've been following the thread for about a month. I'm going to attempt the autofold mirrors, and auto up/down windows myself this weekend. My truck is a 2021 Lariat 502a with the 7.2kw package, no 360 or blue...