If you look at other threads in the forum, there is a different pan and filter on the Powerboost transmission. I believe they need the truck to confirm where the filter is installed, how low, and where the pickup is, and any differences between the standard 10R80 and the Powerboost 10R80...
I have been on the hunt for a replacement aftermarket transmission pan that offers a drain plug and additional port to utilize a thermal sensor. PPE said that their pan wasn't quite deep enough, and that they had no plans to make a pan that was compatible with the Powerboost transmission. Had a...
Does anyone know what is different about the pan? Maybe deeper with the same bolt pattern. I didn't see on the PPE site where their deep pan wasn't for Powerboost.
Having issues with OTA installing. From what I can tell is they are downloading, being scheduled to install, then not installing. Newer truck. 6.2.0 installed fine, then was alerted to 6.4.0 and several times showed will be installed overnight, but nothing. Now that update has disappeared, and...
Setup a camera and record the event. That will serve as proof of the issue. Take it back and if they still can't identify or replicate the problem, see if they have a data logger that can be installed to capture all of the data. Hopefully they can get it sorted. It's tough with these kind of...
I have looked through the wiring diagrams that I have and can't find the mode switch. If someone has one I'd really appreciate it. I'm guessing it's a can device. If so, I might take a crack at trying to emulate the communication to try and inject mode selection at startup. Choosing the mode...
I'm in the Bay Area. Which dealer was it? If you don't want to say publicly, PM me. I have experience with multiple dealers and most suck (Ford is buying back my truck and the dealers have been no help). What part of the BA are you in?
Looking at a used non FX4 truck to replaced my lemon law powerboost. I found one that doesn't have FX4. I'll be adding aftermarket skid plates and Fox 2.5 level kit. I'm guessing the connector for the Hill decent assist button is in the harness. Can I get the correct switches and do some...
More than 70 days in the shop with an unresolved coolant loss issue and lack of OTA updates after many attempts to fix. Mixed in there is a bunch of time to fix the axle.
We weren't towing anything. It was me, my 8 year old and some camping gear. We were going up through the hills to the campground. Ambient temperature was around 65°.
So, Ford is buying back my 21 Powerboost. I like the truck but am not impressed with the cooling systems ability to remove heat from the engine and transmission. A bit ago I was driving through the mountains (under 1000ft) and had the engine and trans heat up. I stayed out of boost and used...
I love the ride my Fox 2.0 gives me. I bought them on a group buy and couldn't be happier. At the time they had a specific strut that covered all of the F150 models except Tremor. Now if you have a hybrid you use the snap ring style 2.0. If Ford buys back my truck, I will probably put the Fox...
I took my Powerboost in to the dealership because the coolant was low. I also let them know that the coolant was darker than normal and smelled different. They pressure tested the system and didn't find any leaks. I realized after picking it up that they didn't top up the coolant. I took it back...
The net has widened to F150s.
https://www.freep.com/story/money/cars/ford/2023/10/02/ford-engine-failure-investigation-explorer-bronco-edge-suv-lincoln-nautilus-aviator/71030958007/
I had this done and now it takes 2 to 4 pushed of the tailgate release buttons to open the tailgate. Anyone have this experience. Wondering if I should take this back to Ford.