Sponsored

Search results

  1. Dash cam

    I have front and rear and ran a power wire from front to back. Would be cool if there was an OBD module that would record to micro SD card.
  2. ECU module programming guide using FDRS

    Don't worry about SOX, your voltage is good. Mine was low too when I started because everyone's batteries suck, lol
  3. ECU module programming guide using FDRS

    That's weird, I'm already at the apim. I guess it's because it did it via USB after my subscription expired and hasn't reported back to mothership
  4. ECU module programming guide using FDRS

    @Snakebitten can you do me a favor and check me? I know inhave a TCU update but don't want to spend another 50 if it's just that for now. 1FTFW1ED2MFB98397
  5. Bad alternator on 2021 Powerboost...or is the dealership just hoping that's the issue

    I like that display. Not TorquePro, which app is that?
  6. ECU module programming guide using FDRS

    I had the USB 0 error and tried to go through the TSB process. While doing the recovery process it wouldn't connect with the USB cable i was using so I had to cancel. After I hit cancel I quickly looked to see what software I was at and it was no longer blank, pre 1.7.1. So I immediately...
  7. My 2021 F150 EcoBoost burned down while driving it

    Yes. It burned the engine compartment, the dash, and the sheet of plywood in the bed caught fire, lol. I've never been to a car fire that isn't totalled by the time thr fire, smoke, and water damaged everything. Unless you stop it right away, it's going to be totalled.
  8. My 2021 F150 EcoBoost burned down while driving it

    All manufacturers have fires. I put out a fire the other day in a brand new Chevy 2500. The guy said he saw smoke trailing him, pulled over and grabbed stuff out if the cab before it became involved. It looked like the fire started back at the transmission, so likely a transmission line that...
  9. 22 Lariat with no Turn Blinker sound?

    There is an IPC update that might address this issue. Not sure.
  10. ECU module programming guide using FDRS

    Yes, you can walk away during the download but make sure you have a charger hooked up with 10amps and the laptop is charged. I would check in every 15 minutes or so for the APIM downloads. Some were faster than others.
  11. ECU module programming guide using FDRS

    There are some that are multi linked. i cant recall which ines, but it does warn you. It says that the update affects multiple modules or something like that. The APIMs are the longest. I probably spent like 10+ hours updating from 1.7.1 to 3.5.3. The TCU update will bring me to 3.5.4 but...
  12. ECU module programming guide using FDRS

    Yes, mine always said i was up to date, but I wasn't. I spent hours getting myself updated with fdrs
  13. ECU module programming guide using FDRS

    So I think I'm finally at 3.5.3 as the USB kicked off this morning and updated successfully. I'm bow at 22228 REV 539 for a non BC Powerboost Lariat 501a. Maybe it's not new but I do like the new navigation on the IPC showing the distance to turn, and no not talking about the little text...
  14. ECU module programming guide using FDRS

    So after my update, I'm caught up to 3.5.2 and downloaded 3.5.3 to USB (5GB) but it didn't kick off like all other updates. So I've left the USB stick in and maybe it will kick off but inwas tired of sitting in my truck for hours. I think the only other update left after thus APIM is the TCU.
  15. ECU module programming guide using FDRS

    I think I'm finally unstuck. I'm at 21146! Hopefully 2.3 is next
  16. ECU module programming guide using FDRS

    It's all blank. It's as if it hasn't completed the update. I may have waited too long and will have to wait for it to kick off again I guess
  17. ECU module programming guide using FDRS

    No. I finally got a chance to re read the instructions from Jesse and I may have waited too long to restart truck. I think it was 45-60 minutes, but I really just wanted to make sure it was more than 30.
  18. ECU module programming guide using FDRS

    So the USB update that Jesse provided me finally appears to have installed as i got the prompt for restart needed. I turned off truck and went away for 45 minutes or so, no lights around usb were on. I waited 25 minutes for prompt to remove usb. Never got it. Multiple drive sessions later...


Top