I don’t think the IPMA changes worked for me. It has been a year since I made any forscan changes. So I downloaded the latest version and made backups of all the as-builts. Made the IPMA changes and saved to ECU but if I go back in and look they have reverted back to original values.
Make sure you have downloaded and set up app for your vehicle first. Then share files in iCloud. Go to “settings” then “menu” then “import files” select iCloud and see if that gets you what you want. Kinda looks like you are trying to import PID’s instead of dashboards
Thanks for posting your results on moving the coolant lines for that fourth bolt. Might do the same with a button head bolt when I am under there for next oil change.
If you have the fiberboard cover you can reuse the two bolts and nuts from the rear and two of the 8mm head bolts for the front. You will need two nuts and bolts for the front frame attachment points.
If your truck did not come with the fiberboard cover you need four of the nuts and bolts for...
Fddlt371 nice write up and photos. I had to laugh because I did drop the red clip from the switch connector behind the dash. That adds another 10 minutes. I spliced the jumper after measuring the required length and had no problem inserting pins from the rear. Just orient it properly and it...
Check the first post of this thread for more details. I ordered these - Terminals for HDC connector C2304 - pin 4 (female) and inline connector C214 - pin 12 (female) located behind the A/C controls. The Ford part #'s for these terminals are WT1001 & WT1002. These two terminals can be...
The wire was not there on mine so yes it needed the jumper added. ForScan changes detailed at the beginning of the thread worked for me. I don’t have my mod file available to tell you my exact changes but if you need them let me know and I can post in a few days.
I believe these will work. Captive nut W717461-S439 and bolt W704336-S439. You can reuse the nuts and bolts from the rear L brackets that attach to the frame and you can pull two of the 8mm bolts out of the fiberboard shield for the front center attachment points. So order at least one set of...
If you think you might reinstall blocks one day just buy another set of 4wd ones for $8 each and cut 1 1/4” off. Price difference between the two is crazy.
Today as a matter of fact! Ford Parts Giant had the best price after taking shipping into consideration but they cancelled my order due to "backorder". Ford Parts Distributor showed to have one in stock so order placed and on my porch in 3 days.
My '22 Powerboost has both the forward frame...
Found a local set of 2021 FX4 skids off a 3.5 and can confirm that after removing the mini skid plate and fiber shield, the front skid bolts right up to a 2022 powerboost using existing hardware. The transfer case skid was not a direct bolt up though. It looks like the transmission crossmember...
Yes, these are priced right and an upgrade over fiberboard. Has anyone confirmed fitment of 17-20 Raptor plates HL3Z-7222-A, C, and E on a 21-23 Powerboost yet?
I have formulated an approach, just not sure when I am going to implement. Plan is to lay out a circuit of various conditions (will include RR tracks). Set up OBDlink logging parameters for lots of VDM pids and drive the circuit a few times in normal, eco and sport. Then analyze the logs to see...