@rugedraw
Tried another half dozen times to get this to go and I feel like it’s being like a 2 year old toddler….
I’ve gone ahead and reset the PCM, ABS, APIM, GWM, and TCU modules in Forscan, cleared any DTCs there may have been in all the modules, updated the only module showing in FDRS which...
Not completely sure what all it fixed or changed but for me in my ‘21 job1 it fixed the problem where you couldn’t control the fan speed using the fan slider if you enabled the climate bar in the APIM.
@rugedraw
Let it charge with a 40amp charger for a few hours. Check SOC was at %90.
tried again but didn’t go through. Decided to reset the BCM and try again, no change.
any update in PTS on the error? I don’t even see this update is FDRS.
@rugedraw
Could you check and see why the OTA for PCM/ABS (23-PU0630-YAW-RT) is failing for my truck? Or point me to where on the ford site I can check myself?
1FTFW1ED0MFB66211
Thanks!
Noticed new TCU update tonight for ‘21 J1.
Doesn’t look to be a flash but rather just a module configuration. Did the update and it disappeared when completed in FDRS. No additional updates showed afterwards either.
Anyone have any info on this one?
Anyone who enabled the unreal theme and the climate bar also get the fan control to work? I can control everything else except the fan through the climate bar. The slider moves but the actual fan speed does not change. Did I miss something to get it to work? The physical buttons do work as...
This also showed up for me, not sure when but looking back through and comparing my Asbuilt data from when I first got the truck there is no specific changes around chimes so not sure if this is limited to ‘21s or not. My truck is also fully up to date with FDRS.
I have been able to make...
New IPMA and PSCM installed. BC does seem better but I do not see any of the additional features like predictive speed assist. Am I right is assuming that there is probably additional configuration or updates needed to get these features like that in the ‘23?
‘21 J1 PB.
Would someone with PTS/Oasis be able to look at the historical DTCs for the PCM in my truck. Had to clear codes, KAM, and adaptive tables to get truck running reliably again. Looking for the 2 codes and their descriptions for engine disconnect clutch stuck open / engagement fault. Believe one of...
Noticed today that I have a “Chimes” menu option on my APIM now but nothing underneath it when you click on it. Anyone else have this menu option and do you have any options under it?