Search results

Piggy backing onto what JEB said, if you go the laptop route, and only plan to use FORScan with your truck, the best adapter is the OBDLink EX FORScan OBD Adapter. $59.95 at Amazon https://www.amazon.com/gp/product/B081VQVD3F

Does it seem odd that everything but the IPMA and DSM have updated by now? Do you think a bad value could keep the module from updating at Ford?

@Jesse-Infotainment Is there a way to force a build data push to Ford? Is it possible that a bad value somewhere could prevent the module from either sending data to Ford or Ford rejecting it and not update the module's values on their side? I've had this persistent DTC on the DSM, despite...

Thank you both, that is exactly what I'm looking for. Mine changed: Was - 0100 0071 Is - 0100 0000 71

Will someone with a 2021 Job 1 Plat 701A please post their value for: DSM 744-23-02

Just to be clear, I believe there are three different steps to this module repair. In the first step, you shouldn't be using the ethernet adapter, just the straight USB cable connection. After that completes, in step 2 you'll be prompted to change over to the ethernet adapter.

Looking farther up in your log, when you tried to run the APIM update via USB this morning, you were warned about poor battery voltage. Are you on a charger? What voltage is FDRS reporting? Battery issues have been a major problem for several with these updates.

Also, if I remember correctly, there were 2 or 3 different things installed during the driver install. Make sure you didn't accidentally click on the FDRS window and you have another driver install waiting and hidden behind FDRS.

Just to confirm, you don't have a USB drive plugged in to the truck, correct? If we break apart the module repair into 3 different major steps, which step from below is it failing on? From the looks of your logs (below), it sounds like step 1. Update with USB cable (computer to truck harness)...

After installing the drivers, are you on the Web Link tab when you see the cursor spinning? If so, click back over to the Module Update Repair tab and click 'Continue' in the lower right. That will probably flip you back to the Toolbox tab and remove the Web Link tab. If it does, then go back...

2021 (Job 1) PowerBoost, built 3/20/21, on chip hold until July '21, when I took delivery. I took a look at everything last night for the first time. The driveshaft looks fine, and the insulation hasn't begun to sag. I have not had the recall work done yet, but I wasn't expecting to see...

Yours looks like mine did when stuck on 1.7.1. No GWM or TCU update available, and the APIM is the same version when I was stuck, DSMU5T-14G670-CA. You'll likely need to start with TSB 22-2117, which can be found here...

By now he has his own Ford botnet throughout the US. One of these days there will be an F150 automated pilgrimage to Dallas. 😂

@Ajzride had the same issue I think. https://www.f150gen14.com/forum/threads/ecu-module-programming-guide-using-fdrs.8249/page-153#post-187054 I believe he got around it by changing computers or uninstalling and re-installed FDRS...

I believe @Jesse-Infotainment is referring to the IPC. Your current software value is not correct. <NODEID> 720 <F110>DSML3T-1A292-CCC</F110> <F111>ML3T-14F094-CAB</F111> <F113>ML3T-10849-CCM</F113> <F120>MU5T-10F906-FDA</F120> <F17F>1PB10OW9</F17F> <F188>ML3T-14C026-CCM</F188>...

Programmable Module Installation Think of it like re-installing a piece of software on a computer. If the software installed on a PC doesn't work or is corrupt, one of the first things you might try is re-installing the software. In FDRS, click on the module you want to interact with on the...

Others have said it, but it bears repeating... After going from 1.6.0 to fully up to date, the PowerBoost is a whole new truck. Electric drive kicks in quicker, more frequently and runs for longer. No more tricks with having to double brake to try and get the ICE to shut off. It now behaves...

Tested and confirmed! After 30 years of hands on the wheel, it's a weird feeling that'll take some time to get used to. Understood. I'll let this rest for a while. Still have ~4 weeks left on my FDRS license. Will try to check it again about a week before expiration. Heated steering...

On a related note.... Thanks, @Jesse-Infotainment, for the consistent and constant help you provide to everyone here. The personal time and effort doesn't go unnoticed and it's immensely appreciated! (Even if you are just "some internet rando" :rolleyes: ) You've helped a lot of people get...

I believe it did. It read, erased then wrote. Awesome! Really appreciate the time and the help! Won't be able to test for a little bit. ***Unless I start a fake meeting to show I'm busy, then go for a quick drive....hmmmm....*** Any chance the gateway is causing the DSM issue? Should I...