A couple weeks ago I was able to successfully get my truck fully upgraded, but in the process I started to get an error: "Pre-Collision Assist Not Available" which means my Adaptive Cruise Control and BlueCruise won't work (2 steps forward, 1 step back :rolleyes:)
I found on this thread that...
I had the exact same experience and did the update over canbus. I hooked the truck up to a charger and let the update run over night. Worked perfectly and any update requiring the USB drive has worked smoothly.
Thanks for the heads up! I knew there were more updates when I quit, but didn't look closely. I think I might have another APIM update too. At this point I got the features that I really wanted, so I'll probably wait before shelling out another $50. Please let me know if you think that is a bad...
After two FDRS licenses, a new battery charger, two broken bolts and many, many hours, I was finally able to get by '21 upgraded to the point where I have Blue Cruise and full screen Car Play 😁
Here is my SYNC version now. I have no idea how it translates to the Power-Up versions 🤣
Many...
I'm in the process of trying to update my MY21 and I think I'm running into every corner case 😄
First I got all the modules updated with the exception of the IPC. All of those went smoothly, but the IPC has been anything but smooth. First nothing would happen when I inserted the USB drive, so I...
I'm trying to update my truck to Blue Cruise (it is a '21) and I'm at the part that requires the USB drive. The files has been downloaded to the drive and I've plugged the drive into the truck. Unfortunately I'm not getting any message on the SYNC touchscreen. In the top left corner of the...
My battery is a Duralast Platinum which a installed just a few months. When I hookup the NOCO 10 to the Duralast and set it to 12V AGM the 25% Red LED blinks and then the standby LED blinks - alternating back and forth. At first I thought the battery might just be very low (which is odd since it...
I'm probably going to be embarrassed when I hear the answer... I understand that the 'x' values mean you should leave as-is, but what do the '-' values mean? I did the double horn honk disable on my truck and left the '-' values as-is and it worked. What is the difference between the 'x' values...
@Snakebitten it may be totally unrelated, but recently I noticed that truck was not switching to electric mode and even when it did, it was only for brief moments. My MPG around town had dropped from 23/34 to 14/15. Basically I wasn't getting any electric benefit anymore. Hopefully there isn't...
Sounds like people have had different experiences regarding updates. My truck as stopped updating since I applied the tune. Perhaps it depends on what the update is updating?
My memory might be failing me but I vaguely remember Livernois telling me that an eco tune isn't available for the Powerboost. If someone else had a different experience then please correct me.
My 2021 Powerboost's battery is dead. Went out to drive it yesterday and it wouldn't start. I hooked it up to my NOCO 10 for a few hours yesterday and it didn't really gain much if any charge (it was still on the lowest indicator level). I park on the street and cannot leave the extension cord...
I bought these back in May for a '21 3.5 Ecoboost, but ended up switching to a '21 Powerboost around the same time so never installed them. Never unpacked, brand new kit (coilovers and rear shocks). I paid $1300 and I'm asking $1000. I haven't taken any pictures since they are literally still in...