Search results

I’ll can add positive results around the concern for battery discharge though my truck sits quite a bit. I work from home and it’s not unusual for it to sit for 2 weeks in the garage. During winter up to 3+ weeks. I’ll have had my 22 PB Lariat 2 years in June covering a low 5500 miles. It would...

Some thoughts on Eboost. I had similar results to Bob. The EV takeoff is very noticeably different. No 2nd gear in EV. The ice cut=in at the 1 to 3 three shift is very accentuated by the firmer shifts that come with tune. IMO its a drawback in slow traffic. I was very suprised by how it can do...

The entire harness is on standoffs along the length of the axle. After checking end to end, the clearance is generous except for one obvious point of contact. This is the driver side of the housing, on the outboard side of the brake line brackets mounted to the housing. The harness is not loose...

Amazon Prime Day sale today. If you’ve been holding out, get em while the gettin’ is good! OBDLink MX+ OBD2 Bluetooth Scanner for iPhone, Android, and Windows https://a.co/d/6P6RiCm OBDLink EX FORScan OBD Adapter https://a.co/d/8XYNuf1

Thanks for sharing your journey. ;) I trust it will be helpful for others if they encounter similar issues when setting up their 'new' IPMA's

I'll second that. Can't say it enough, @Jesse-Infotainment is an invaluable resource and a good dude.

What I'm thinking is possibly having the original done. It would be great to have a back-up IPMA and what better than the original in case the ebay one takes a poop. Would be cost dependent probably. I bought a second hvac head when they dropped to $100 just because its too cheap and no way...

Great update Jesse! Its good to have options. Look foward to seeing what you think when you have it back.

I would suggest that anyone concerned with warranty can review the Magnuson Moss Act provisions around repair. Its long but the key takeaway would be for servicing and repairs (programming in this case) when done outside a dealership. The principle was to protect consumers when others worked on...

I’d be per willing to bet these are the ones that were ‘dropped’ at the factory or supplier, or some other rational that had Ford put them into the reject bin for this seller to be scoring dozens. I don’t see that being really questioned as much as being overly worried about packaging. Maybe...

^^^ this times 10 ! I went out today to pick up the new tank heat shield the dealer ordered to replace my original after their "tech' bashed the corner of it in with the counterbalancer of my transfer case. I am not sure the McDonalds training that the dealers find sufficient necessarily...

I didnt know about this one until I got the 4.2.2 update today on my job 2 '22. Prior the install notice, this AM when I first started her, there was a popup to confirm if I wanted to leave the rear seat alert off, which had never fired off before. So thought something might be in the works. I...

SOLD

Too true. Adding production value helps move it beyond the 'video or it didn't happen' phase. Trying to gleen from the context how this ties in, doubt its coincidental that Jesse was getting this hooked up end of last year, and now we see someone received an APIM with 1.2 infused into it...

A few months ago actually. But it was kinda snuck into another thread and didn’t get noticed to the degree one might expect. Probably because there was no youtube video :) https://www.f150gen14.com/forum/threads/can-active-park-assist-2-0-be-installed-when-parts-are-available.13767/post-296562

Thread forming screws #8 x 3/8 or 1/2, alternate M4 x 10mm Cheapest - sheet metal screws #8 x 1/2 12 pack @ homedepot $1.50 If you get legit plastic thread forming in #8x3/8 or M4x10mm from McMaster-Carr they will run $9 to $12 for 25 / 50 packs. All work, comes down to OCD level ;)

I’ve had my share of buybacks over 40 years of driving. Had a strange bad run in the early 2000’s of back to back lemons across multiple brands. My takeaway is, almost entirely simply luck of the draw. Anecdotally I’ve noticed two lessor factors. 1. Lease vs. Purchase - purchasing seems to...

Doesn’t look like you have to go to that extent. Based on the pic on this thread and the second ebay item posted by @GrandpaD, both the fanned chargers had holes in the pad. Which makes sense. The mold date on that one was Oct 22, so possible a ‘23. Also noticed it had an amp rating where the...

Nah uh! ;) You may have the only one! Makes me wonder if some 21’s have a different “charger” that IS actually a charger? The only function My OEM charger seems to provide is turning my phone into a hotplate to reheat frozen burritos . Phone never charges, but great for 2+ hour drive...

noticed the same, missing green connector on b a couple. He is listing by specific number but shared pics on all of his similar modules. If the module number isn’t what the specific listing is, it’s going back…