Search results

Ok here goes - debated whether I should say anything. Hey OP - please consider removing this thread. There are lots of other forums to discuss stuff like this. This forum IMHO has been one of the most helpful and incredibly respectful forums I have been associated with. Lots of people helping...

You need to look at your payload on your door jam. I spec'd my truck very carefully to end up with 1850 lbs (I did go with max tow and 20" tires which reduced my payload). Your 6400 lb trailer likely comes close to 7000 to 7400 lbs once it is filled with everything. Use 13% of trailer so...

The issue or depending on your point of view, the advantage of the 1363 lb payload is the options that come on a limited version of f150. Every option reduces your payload. A stock XLT is going to have around 1950 lb payload. Very rough way to look at is that for every 100lbs of extra payload...

@maxis1230 the post above is good advice. The trailer industry always quotes 10% of total weight for hitch wt but as post above highlights u should use 13% for travel trailer. So Trailer @13% fully loaded. - 1300 lbs Hitch. - 100 lbs Total is 1400lbs...

See above - factory reset fixed my issues.

@FordTruckMan helped me out (this forum is great!) Need to factory reset sync. Fixed my wireless project immediately. Don't know about eliminating need to reboot yet but sync loads a lot faster now.

YES this worked! Thanks MATE. I guess I should have thought about this. Connected everything back up. My forscan changes are still all there as far as I can tell. It does load a hell of a lot faster now as well. No long splash screen delay. Hopefully will stop the reset issues I was having.

Great news if that will fix the wireless projection issue and frequent rest. This is the procedure right? Thanks for the quick reply and help. Really appreciate it.

I am having both issues (sync resetting and wireless project greyed out). U make any progress with yours? Do u have the unreal engine turned on thru forscan?

We're u able to get wireless projection being greyed out resolved? I am taking my truck in tomorrow. May be just an ota update that broke something. Want to check to be sure it isn't something like having the unreal engine being turned on in forscan.

Any thoughts on if having the unreal engine turned on thru forscan is creating an issue with wireless projection? My projection is greyed out (wired works fine) and I am taking into dealership this week to have them look at it as well as other regular maintenance

I started having the same issue - ie the wireless projection won't work (wired works fine) Also my screen freezes and resets itself about once a week. I did get 23-PU1113-UNX-DC update a few weeks ago so that may be it. Not having any other issues that I know. I have made a few forscan...

I put on the wacko AC silencer on my RV and it was a game changer. We couldn't watch tv comfortably without it but now it is a pleasure to have the AC on and watch tv. Expensive for what u get but it works (I also did extra taping in the AC box as recommended by several users). Our furnace is...

I believe he has added digital temp number readout thru forscan. To my knowledge that can only be added Lariat and above ie full digital dash (I have a 302a as well). You can select the 2 middle gauges options from a list. I always have the transmission temp and boost gauges in the middle...

I have essentially your truck specs including 20" tires with similar WDH, though my trailer is a bit heavier at 6200lbs dry. I still have the OEM hankooks (recommended 36 psi). When I pull the trailer I increase pressure to 45psi. Very anecdotal, but I believe it helps towing so continue to do...

Thanks for sharing this. I have the unreal engine and climate bar turned on in my 22. I don't have any real issue though lately it gets occasionally hung up on the splash screen and I have to reset (power, fwd). Should I be concerned and be looking to turn unreal and climate bar off before...

Yes an official ford esp. It is the Granger ford dealership. There is a complete thread on this forum about cost plus $50. You do need to be able to give them a US address but they will work with you. All the paperwork is by email. Understand from other cdns that their local cdn dealership...

This is the issue with buying esp in Canada (I am a fellow cdn). 3500 for essentially 2 extra years of bumper to bumper warranty. It is why dealers push them so hard. Canadians who buy from Granger or flood in USA pay ~ 2000 for 8 years or 5 extra yrs of bumper to bumper.

I bought from Granger and no physical mail sent to my US address. Granger emailed me all the documentation. Most importantly my local cdn Ford dealer sees the 8 yr extended warranty in their system. I haven't had to use it but my dealer at least sees it. It was easily 1/3 of the price I could...

As a fellow person in Ontario I was very worried about theft in general. I was quite concerned on my recent 10k km round trip to Vancouver and back. The truck BTW performed flawlessly and it was incredible for long driving days - the trip made me love the truck even more than I already did. ...