Search results

https://a.co/d/2rnsTn 2024 F150 RCSB 4x4 2,000 miles Did my first break in oil change using Ford oil and filter. I also changed the diff oil using Valvoline full syn 75-140. ALL of my trips are short, less than five miles, so I always remote start my truck and allow it to warm up until the...

Note: I posted this yesterday as a comment to the shipping thread of this contest but felt it needed to be its own thread to better get my opinion seen. TLDR: I won some free floor mats for my RCSB from TripleALiners and they are really high quality and much nicer than the factory all weather...

2024 RCSB 5.0 10 Speed 4X4 with 3.73 gears. I leveled and then mounted 35X11.50/17 tires. 35s are 10% larger than the 31's (265X70/17) that came stock. As EXPECTED, my speedometer was off by 10%. 40 mph on the dash was 44 GPS, 50 was 55 GPS, 60 was 66 GPS. I used a couple of GPS devices to...

I am in the process of creating a "spares box." Obviously I plan for flats and torn valve stems because those are common, at least they are for me. But I'm curious about what hard parts (if any) tend to fail off road.

Just a shout out to Bruce Watson of Hush Car Audio and his custom wire harnesses and looms. I got the bug to upgrade the sounds in my 24 RCSB and read about Bruce here in the forum. I hit him up and based on his experience, ordered the Kicker Key 200.4 amp and his custom PLUG and PLAY wiring...

These monsters (35x11.50) weigh 98.6 pounds. Just a data point for the collective.

Is there a small, powered 8” sub and box that will fit under the driver or passenger front seat? I have a 2024 RCSB, looking for a bit of an audio upgrade but I do use the limited space behind my seats so I don’t want to give that up. TIA PFA

Is anyone making replacement red LED bulbs for the front map lights in the 2024 F150? I have Googled without luck and reached out to F150LEDs but they do not currently make them. TIA

Has anyone used 1/4” wheel spacers and had a problem? Or know someone first hand who has used them and had a problem? I’ve used thinker spacers n the past the use additional lugs bolts with no problems and I have used 6mm on my Porsche with original lug bolts. I doubt I will have any issues...

OK, previous models have an obvious Philips head screw to adjust headlights up and down. Mine do not have that. They each have a 10mm bolt that goes horizontally towards the headlight housings. The bolt is covered with a plastic half dome cover with what I will describe as a small chimney or...

Hey Truckers, I received a lot of input on this topic and it seems to be coming up again. So, if you are seeing this for the first time.... TLDR: 2024 RCSB 4X4 - I removed the rear blocks and then used 2wd length shocks and bump stops and u-bolts. I did not add any shims. The results are...

I’m probably late to the party and this is probably common knowledge but…. Today I was playing with my 24 XL and discovered that if I push the unlock button on my key fob three times and hold it down on the third push for 2-3 seconds, both windows roll down (regular cab).

Is this a 9.75” or an 8.8”? TIA

Anyone? Does anyone have a part number for the factor nuts that are used on the rear suspension U-bolts on our trucks? If not and you feel like a challenge, try to find it. I found the part number for the 2WD U-bolts themselves (ML3Z-5705-A). Now I just need the nuts but they have proved...

Too Long, Did not read version: If you are in So Cal and want to purchase a Ford, save yourself some time, money and frustration and just call Mr. Neil Stone at Galpin Ford. (818) 778-2912. Long winded version: In 2021 I purchase a custom ordered Jeep from a large multi-brand dealership. I had...

Got the rail car Number BNSF314374 Called 1-800-235-2352 about ten times. They cant understand what I am saying. They get a different letter wrong each time. So I never get past the car initials. Tried typing it in as well and they are confused. Their AI sucks. Anyone have any pointers...

Howdy, I ordered my truck a few months ago with 6-8 Dealer Installed Options and my truck recently shipped. I have read that the Illuminated Logo is shipped from the factory with the truck and is installed once it gets to the dealer. What about all of the other DIOs like, Splash Guards and...

I ordered my truck in early April and have a scheduled build week of 5/20/24. Thought it might be useful if others with the same build week had a place to share our communications (or lack there of) from Ford about our builds. Mine is a RCSB XL 4X4 with the 103A package and spray in bed liner...

Can a 35/12.50/17 fit in the spare tire well? My truck won’t be here until June or July so I can’t measure myself and I did not find the answer in a search. thank you.