I don't drive my truck a lot (maybe 2500 miles per year). So keeping the battery charged up is a challenge, especially since I don't normally park near power (across the street where there is zero power).
So I had the Noco 2d charger but it would take days to charge the battery to anywhere...
Edit: For those that fall upon this thread. I wrote this in the heat of the moment and I think that caused a lot of confusion. I took the truck in because I had the "Reverse Brake Assist" error. I had read that could be caused by the tailgate being removed and when added back needed to have the...
I don't drive my truck much and I've found that this truck really loves to use the battery when it's sitting still (my '17 would run low, but not like this!).
I installed a NOCO charger under the hood, but I don't normally park near a power source. I park across the street an undeveloped piece...
So I'm looking to add running board lights, especially since I use the Lincoln fold mirrors and don't get the benefit of the puddle lights under the mirrors.
I know some have added them, but looking for some recommendations. I've done some reasearch and one thing I'm being a bit particular...
I want to put an Anderson mount on one side and a standard power inlet on the other. Before I take my bumper off, does anyone know if there is anything behind these panels? I found the parts online, so I know they removable (in case I want to revert), but I'm not sure if there is anything behind...
So we got hit by Ian. The southern edge of the eye grazed us and we've been without power since 4pm yesterday (Wed 9/28). I wasn't expecting such an early power outage so used the gas generator last night until I went through 5 gallons of gas. By my estimations it lasted about 12-13 hours...
I was on Amazon and saw this. Since I have a swing case I can't use the boxlink to put a divider in to prevent stuff from sliding back. I'm sure the 52" version would fit with 1 swing case (someone in the comments reported the 48" works with 2 swing cases).
Just curious if anyone has tried it...
(I put this in off-topis as I wasn't sure where else to put it. Husky isn't a sponsor of this forum, but I wanted to share my experience with them)
So within 1 week of buying my f150, my wife got her '22 Explorer. I already owned Husky liner x-act contour mats from my '17 I moved over and we...
I don't drive much and I've found that my '22 powerboost doesn't last long when not driven. Sometimes it's 2 weeks, sometimes it's 1 week and I get the dreaded fordpass message saying it is going into deep sleep mode. (I try to drive it every few days, but depending on work/family/life itay just...
Curious if anyone has bought and installed the avs aeroskin light shield pro hood protector?
https://www.autoventshade.com/aeroskin-lightshield-pro-hood-protector/2022/ford/f-150
I'm considering it but wanted to see what people thought of it.
I think I found the part number for the BAP ford emblems, but was curious if anyone knew if they fit the 14th gen without mods. I know there differences on the models with cams between the 13th and 14th gen.
I've found a few sources that say these work with 2018+ f150s, but still skeptical...
I tried the Chemical Guys Hydro line. IT's ok. The Charge did better than the Slick, but I've noticed swirl marks, which I've tried my best to not introduce. I know the CG stuff would not protect from that, so I'm not faulting them, but the Hydroslick didn't last 1 month (it's rated for 12...
Has anyone else run into this. My driver side mirror won't close when I lock the door. I can hear it try but it stays open. The passenger side closes.
Now if I get in the truck and press the button it closes fine.
Because of this and the fact I e enabled Lincoln auto fold, when I get I nthe...
I ran across this for the Tacoma and I was wondering if anyone has seen something similar for the 14th gen f150s?
https://overlandequipped.com/products/copy-of-auxiliary-fuse-block-bracket-for-3rd-gen-toyota-tacoma-2016
i think it would be nice for adding accessories (lighting, wenches, etc).
I like star wars. My truck makes me really think of the red guard, but thinking of doing either Roque Squadron or Red Leader theme. Not sure. Just gonna log my process/updates here and see what people think (though I will ultimately do whatever I want, but don't let that stop you from honest...
I've been detailing the interior, but the more I do, the more I'm curious what parts are actually leather that I need to condition.
Are all the brown/red parts leather? (2 dash pieces, upper door panels, center console top).
Are the black arm rests leather too? They feel like it.
So far I've...
Can anyone tell me how to get this off? I normally have chrome wheel and I can polish stuff like this out. I've tried scrubbing it off with a soft cloth but no luck. I'm scared polish would leave a shiny spot on the wheel.
I have no idea what left the mark.
I've been looking for some Raptor, Tremor, or BAP tail lights for my truck and I ran across these. Are they custom painted or is the "red" normally this dark on them? I've only ever seen this one like this so I'm guessing it's custom "painted" or tinted.
I want to modify these, but I want to keep a set of unmodified version. I can't find a diagram that includes them. Does anyone know where I can find the part number of know the part number itself?
So today I had to take my cat to the vet and wanted to precool the truck so I used the remote start. When I did this it didn't start the gas engine, which is ok with me, but the truck was LOUD. I took a video I can post later but I used a sound meter on my phone and it was 84 (max 87) dba.
Is...