Search results

@Ajzride I drive quite a bit. I put about 500 miles a week on my truck on average with a blend of all driving types, but not much inner city. If you need any tests, logs or videos to assist in development, please let me know.

Thank you for all your hard work. I installed this today and used it on my way home from work. A roughly 22 mile drive (15 in rush hour on 2 and 3 lane expressway, 6 on a 2 lane highway and one on a coutry road). Initial thoughts compared to SunnyPilot Dev3c: 1. My ping pong issue on straight...

I have a 23 XLT 301A. I assume you have 360 camera? All you need is the CCM and the bumper harness. The rest of the truck is wired.

I am recently (In the past week or two) noticing more of the truck swapping back and forth in the lane at highway speeds. It is smooth when in a curve, but in a straight stretch of highway, it hunts back and forth from left to right. It's enough my wife noticed it and asked me to turn it off. I...

@Ajzride I had a similar experience in a down pour. The comma could see the lanes and traffic better than I could.

When you say "to fix the acceleration and braking" is that dealing with approaching stopped vehicles, or is that more with the way it deals with slower cars? I have learned to just do my own braking on stopped cars when travelling over 35mph to save myself and my passengers the stress it causes...

I am running an aftermarket tune that is turned up quite a bit. I do a fair amount of data logging and didn't want to have to unplug everything to do so.

@Ajzride I got my 3x installed and got it up and running on the rollback branch. I went with the settings in your pdf. The only question I have is what driving model do you suggest?

Well, I got my adaptive cruise and lane centering up and running. I have my OBD splitter and extended USB C cable. My comma 3x arrives Monday. I am excited to get it up and running. It seems the talk on what to run on it has slowed lately. What is everyone's go to now? Open Pilot with Ford...

My current truck isn't lifted. My last one had a 6 inch RC lift on it though. Did you get an alignment after the level kit? When you push the LCA down further it changes the toe a decent amount and it is unstable going straight until it's fixed.

I never got a chance to get a full quarter mile in. I was working out of town for a few months and didn't know of a safe place to try and run it out. Calculators told me it was a mid 12.50

I need to get some good weather and a chance to get more photos, but I have installed a Cervini 3" cowl hood. Purely cosmetic, but I like it. I also tinted the tail lights, but don't have any exclusive back shots at the moment. On the perofrmance side of things, I have added a set of NGK 95605...

I added a current mod list to the top of the first post. Also I have some news on the performance front. I am pretty certain I am the first 2023 Ecoboost to be tuned with HP Tuners. If you go to their site, they still do not officially support the 2023. I want to give props to Adam at ZFG for...

I actually had thrown out the old piece, but found a guy selling his crossmember that still had that flange attached to it. I bought it and had a buddy of mine with more skill than me weld it back in place.

I was back and forth between these and the Anthracite (dark grey) of the same model wheel. I am glad I chose these. I think the bronze goes well.

I haven't updated in a bit. I got my Forgestars and Toyos installed. I think they turned out pretty good. I ordered a Cervini 3" cowl hood during some of the Christmas sales, but it doesn't ship until the 17th.

No actual progress update, but parts are coming together. I have the GEN 2 Raptor exhaust sitting in my garage. I just ordered the Tremor bumper caps and the Ford OEM Trombone from a GEN 3 Raptor. Once they get here, I will probably try to bench fab the muffler and trombone together. Once I have...

Unless I have been reading through this thread wrong, the ACC is only needed for longitudinal control (gas and brakes). Not that I don't want that out of this, but I think you get the steering control even without ACC.

So, I keep seeing lane centering mentioned. I assume that lane keeping is not the same. If I have an XLT that has lane keeping will this work? If not, does anyone know what modules or parts are needed ro upgrade lane keeping to lane centering? I assume with some parts and forescan it can be...

Did some paint work yesterday. I never did like the factory XLT grill and the fender badges had room for improvement as well. We body matched the grill with some race red accents. I also took the badge apart while I had it off and painted it race red and black. On the fender badges I took...