Search results

I know b1578 dtc is 360 calibration. I have 360 cameras. Forscan log says service procedure completed successfully. 360 camera view is spot on. Centered in the parking lines. But the DTC remains. I know rugdraw will say ignore it. Lol I'm anal and would like to clear it. So a...

Was there a recent update that could explain why my truck feels quicker? Not faster but way more responsive at tip off? It feels like what sport mode felt like. Sport mode is even better

Is tuning going to come to an end after 2025? Im not holding my breath that right to repair is going to make much headway in the foreseeable future. Are we going to see the sale of pre loaded modules? Or possibly having to send out our modules to be bench programmed. I like the thought...

I put the original ipma back in my truck to bring it back to stock for the dealer to diagnose why I couldn't get lane keeping calibration. Long long story. Dealer said I needed to restore all original modules first. When I put the original ipma in i saw that I had blue cruse 1.4. The...

Where can I purchase a pts license?

I have been working with Jesse on installing a new ipma. It went well but I'm still getting failed lane keeping calibration. Stops at 81%. Jesse suggested that ether the camera or the cable is bad. Really can't be anything else. I took it in to the dealer. They have it 5 days now and...

Has there been a update that broke the pre heating of my seats and steering wheel with remote start? I remote start and when I get in the seats are cold.

I'm in the process of removing my heads. Don't need them anymore. I have a 2011 3.5. 110k miles. No tune. While I'm in there any advice?

I recently purchased a timing set from a ebay seller that touted OEM parts. When the parts came i see absolutely no part numbers or indicators that they are FoMoCo parts. There is not a single thing stamped on the cam phasers or any if the other parts.

Can I remove heads from 2011 3.5 ecoboost without removing turbos?

I guess the bean counters don't drive rual roads in the Midwest. I guess

I have another truck that started to develop a very strange and loud noise up top center. Definitely not cam/chain noise. Took off valve cover. No apparent damage to can and lobes. Went to turning enginge over with starter. There was a little snap and rotation speed speed up like there...

If i PMI a new module and it works then can the old functioning module be swapped back in work also? Or are we required to pmi each time we swap both modules even if they both had a pmi done?

I broke a release tab on a connector. C242C. I located the connector number in alldata. It says it's not available. I just need the housing. There is a number under harness. Does that mean I need to buy the harness? There is another connector right by it C242B that has a pigtail...

It's cold! Just now I went to start truck and battery was completely dead. I forgot to unplug a vlc from the obd port. So I used my key to open door, got 40amp charger started. Truck did all sorts of goofy stuff. Mirrors went in and out. Horn hooking strangely, lots relays making...

It kind of tickes me off that ford decides to remove over half of the interior lighting. Nothing on the console. Nothing in the foot wells. Ambient lighting gone and the over head lighting is virtually useless. Then to make matters worse ford's logic to shut off interior lighting first...

I have a need to keep my ice running at an idle for a test procedure. It keeps shutting off like normal. I know i can press the gas peddle but I can't keep it a idle. Lowest is 1200rpm with gas peddle. I turn on heat, fan on high, lights on. I try to load system up so engine comes on...

I know we can't do a bcm update. Only the dealer can for now. My truck is going in for its second trailer brake module replacement under warranty. Should I ask them to do it? What does a current version do for us? I know they have to do a PMI on the brake module or at the least hooked...

It's winter here. I often keep the truck running and use keypad to lock doors. If my phone is in my pocket when I return android auto says can't connect. I have to do a sync power reset. Or shut truck off and back on. Even if I go to connect phone screen it won't work. That one takes a...

I use fdrs on my 2022. I see it doesnt work for that year. What is the equivalent software and hardware for ford tec level services? Specifically I need to diagnosis hvac actuators. My brand new topdon smart scanner is very limited. Pull codes and such.