Search results

If someone has a chance, could you check my VIN for updates? A month or so ago I did all available updates (except BCM of course) and the ForScan changes and seem to have the better BC but don't have lane change wondering if I missed something. XXXX (will clear after response) Thanks!

I did Ziegler. did it all online They were great.

I did my first RV trip in January towing a 32' trailer. Got about 9 mpg average. Much worse with Tow mode (8 ish) than with normal (about 10) as it blocked the hybrid mode. Worked well with Tow mode for hilly areas and normal of the flats.

This!

This was in response to the threat of tariffs. I suspect the US wants to see if they will actually do something before cutting the tariffs. These tariffs are a big stick but they sure get action fast.

It's hard to tell from your photos but did you install the end links outside or inside of the swayer? IThe instructions say to install them outside but I just installed mine and the links were much more vertical and better aligned installing them inside of the sway bar ends. Curious.

I think I have BC 1.4. I updated thru FDRS to Sync 24127 and did all the Forscan changes (I triple checked this) The BC works great, even on twists and turns that normally it couldn't do but I do not have the option for Lane Change Assist but do for Predictive Speed. I do not currently have a BC...

The auto hitch part is interesting. I recently updated to the lastest Sync and did the Forscan changes for BC 1.4. Just after this I decided to activate auto hitch and as soon as I put in the IPMA change To enable auto hitch: IPMA 706-01-01 xxxx xx5x xx-- I got the lane change warning...

California cars are smog exempt for the first 8 years. That should get you some time.

Thanks! I double checked the Forscan changes and looks good but will check again just to be sure.

So it sounds like the option will not show up on the Drivers Assistance screen without a subscription. Is is normal for the PSCM update to not clear? I know the ACM does not and the BCM is not possible without a special login. Thanks

I have the self driving but have to put my hand on the wheel every few minutes when it complains. Otherwise will steer, accelerate and brake. Also now seems to anticipate turns up ahead by slowing down.

I just finished the IPMA and PSCM updates (in that order). All apparently went well but the PSCM did not clear. I have done it 2 more time, both which went quickly but still there. All modules green on FDRS. I did the Forscan changes for 1.4 and BC works better but don't have the lane change...

Can someone please check my Vin? Want to see if I am ready for BC 1.4 Thanks

The truck has far more materials going into it (metal, glass, plastic) Makes since it costs more... I am always surprised by how inexpensive trucks are compared to a little car like a 911.

I looked at Tundra when I bought my 2012 but it had 50 less HP and almost 1/2 the MPG as my PowerBoost. Definitely would not now with all their reliability issues.

I average around 18-19 mpg. Mostly in town. Can do better on the freeway but most of that is 75-85 mph. 35k miles Platinum PowerBoost.

Agree. Hose material is poor. Plan would be this plus high flow fan in 3000 sqft garage with 10x10 garage doors open on both sides for cross flow of air. Not for generator, just for running car to set timing, points etc. Has got to be better than the fan alone.

I am thinking about something like this for my garage in case I want to run a vehicle inside. Probably use better hose :

Just got mine back from second trip to the dealership for this issue. First time they said it was the turbo waste gate (??). This time they found he sound coming from "catalyst converter flex pipe". They loosened all catalytic converter bolts, neutralized exhaust and retightened. "Retest OK...