No issue with memory, that is built into the truck, not the seat. Use the airbag and occupancy sensors out of the seats that came in your truck and it all should work fine. The heated seats can be used, you just have to do a little more Wireing and programming. Just do a search for adding heated...
I have decided to sell my 2024 F150 4x4 XL. The truck currently has 2700 miles and has plenty of factory warranty left. I am selling because I never have time to drive it.
This truck is tastefully modified cosmetically only, with no engine or exhaust modifications.
Ridetech suspension front and...
After I did the back wall, floors and doors, the truck was very quiet. I will drive mine today and see what the roof added. Everyone says it makes a difference. When I did the doors, I also added the panels to seal off the big holes in the doors. The only noise I could hear after that was the...
Since my family is not having Christmas until Friday, I spent Christmas Day adding sound deadening material to the roof of the truck. I had previously installed the material every where else.
Dropping the headliner was no big deal, but I did discover that ford glues all the cab wiring to the...
I got my remote and key from ADL today. He cut the key from from my key number on my key tag. The mail took forever, or I would have had it by Wednesday, he shipped it the day I ordered it.
I programmed it in about 3 minutes or less and tried out my new remote start on my new key fob. It works...
What if you're like me and don't give a shit if you ever use a phone again, much less cary it around with you on the weekends. I am on a damn phone all week and never want to hear it or see it on the weekends. As soon as I finish this job, I will have a flip phone again.
I also don't need to log...
I remembered to look at my truck last night as well. The tie rods are defiantly at an up angle. I was going to put an angle finder on them this weekend and make sure the angle was enough. I don't want to put the kit on and be at to low of an angle in the other direction.
The kit is cheap enough...
I tested the passenger seat with a 12v power supply and made sure it worked while it was sitting in my shop. Once I knew it was good, I simply connected the purple and red wire to positive and the black and blue wire to negative in the truck. In my truck, I just connected them to the same color...