Just curious. I have a 6" lift on my truck since day 1. Never thought to much about the active airdam
tell I read this. Since my truck is lifted isn't my airdam pretty much worthless and do nothing anyways?
About a month ago I changed my 2021 Lariat to 32 = 50%
I do like it but maybe it's a little too bright and like others have said I don't really want to shorten the life span. I found 19 = 25% to look the same as the default at 10%
Is it possible to get in-between 25% & 50% like 35% by using...
ok speed test done and it’s pretty dead on. 1/2 - 1 mph fast but that’s great. No DTC faults at all. Can’t believe I lived with it off 5-6 mph for 3 years. Thank you SilverPigeon. This group really is amazing and so helpful.
Im sure I’ll have more questions needing help soon. That I am pretty...
Ok here is what I did. Went into Bdycm module, tires. Changed back to original 2547. Cleared code DTC no fault. Then went back in and started going up a little at a time. 2674 is the highest value I can reach and relearn the PCM with no fault on the DTC.😁
It’s about 75mm lower then what had me...
ok I think I understand. I’ll try this out step by step. I understand what you are saying though that this size tire was never meant to be. So I will be increasing it not decreasing it?
When I change the tire size I did not do it by changing the value. I did the easy way by tire circumference...
Today I gave it a shot. I did the PCM relearn it said successful. Rebooted and went back into FORScan. DTC and PCM was still showing fault U0422:00-2F
Did a DTC reset again and it still comes up.
can’t do the TCM relearn as I don’t have that module listed as available.
Any other suggestions?
Finally did my Big Tires 325 60 20 in FORScan yesterday and the circumstances I put in was pretty dang close. Went from 6 MPH off down to 1-2 mph. I might still play with that later a bit to get dead on.
Here is my problem though. I’m getting a DTC error and when I reset the module & cycle on...
So excited. Just did my first FORScan Module and no more Double honk. That was not to bad. Thanks Rugedraw, Jessie and Livinup for doing this page with all the directions and tips.
Not sure the next one I’ll tackle but want to get a little more practice before I do the BlueCruise 1.4 module.
Well dammit. After years of being scared to do FORSCan and mess something up. I was finally ready to start it today. With some coaching up from Jessie earlier this year and Rugedraw Javier last week saying I’ll be fine just do all backups first. Today was my day to start. Loaded FORScan on the...
I'm really not 100% sure. It was at the beginning of the year Jesse was helping me. How do I find that out?
This is my SYNC info.
SYNC GenerationSYNC 4
SYNC Version4.0.23291
and my last update was 9/21/24 ECG-24.2.5.6.1
and before that in may was update 22-PU1009-TLC-CSM2
Ok got it. Thank you rugedraw your always so helpful. I just did a google search and it said this lol
Yes, the 2021 Ford F-150 Lariat 502A will be eligible for the BlueCruise 1.4 update:
BlueCruise 1.4
This update will be available for certain models from 2021 and later, including the...
I have a 2021 Lariat 502A and had a ton of problems with Bluecruise from day one. They almost did a buy back it was at the dealer so long when after 2 years they finally figured it out. Long story. So finally in Jan 2024 I have Bluecruise and paid for the 3 years. Happy with it and have been...