Sponsored

Search results

  1. Glare free not working: 302a XLT upgraded to Projectors w/ HCM

    I would get the year license from ForScan and take your time. Do a BACKUP of every module in ForScan and save a copy of you AS-Built from the Ford website for future reference if needed. I've attached my ForScan sheet that I kept of basic changes I did - this is for a 501A Lariat so they...
  2. Why am I not receiving updates?

    Post your vin here and they can check to see. Many 21's have been stuck since day 1. https://www.f150gen14.com/forum/threads/request-vin-lookup-thread.13393/
  3. ISO BAP LED tail lights..

    Here's the Video Quads are great but the Adaptive LED's are impressive. The bending of left and right with steering and the Glare Free high beams are awesome and seamless.
  4. FRDS Help

    I would post your vin here https://www.f150gen14.com/forum/threads/request-vin-lookup-thread.13393/
  5. ISO BAP LED tail lights..

    @fordhouston @GypsyDanger Here is a good video showing what is involved. You really don't need the level sensors - I didn't install them in mine. I also started with a Plug & Play harness then I removed it and hard wired since I don't plan on removing the headlights. If you still looking for...
  6. Heated Steering Wheel Retrofit - updated with information

    You do have the wiring for the HSW. Most have replaced the whole assembly - easier in my opinion.
  7. Adaptive Head Lights - Coming to the US???

    It works GREAT! You’ll be kicking yourself for not doing it sooner.
  8. Swapping headlights from reflector to projector LED headlights?

    i don’t think you can calibrate the HCM unless all the sensors are hook up/
  9. Swapping headlights from reflector to projector LED headlights?

    Going to need a long Philips screwdriver and follow this. https://www.f150gen14.com/forum/threads/headlight-correction-following-level.5360/post-119481 Your headlights must not be wired right if the top bulbs go out with your high beam.
  10. Swapping headlights from reflector to projector LED headlights?

    This is for wheel base, really don’t think it will make a difference. The headlights move with the steering wheel when going above 20mph. You may need to adjust the headlights to get the proper beam. On the LED projector headlight, the top is always on but never changes brightness. The lower...
  11. Swapping headlights from reflector to projector LED headlights?

    Are you sure they installed the HCM? You can install the LED projectors without it. Can you post a picture of the headlights they installed? Heres they changes I did back in the day but might not apply to yours if the HCM is not right.
  12. Heated Steering Wheel Retrofit - updated with information

    It’s at the bottom of his page / signature @superfordman
  13. Heated Steering Wheel Retrofit - updated with information

    Here’s superfordman sheet
  14. Heated Steering Wheel Retrofit - updated with information

    Did you load the you old HVAC and make the changes from the forscan sheet after?
  15. Changing settings with Forscan for new H7 battery and get checksum error

    @Calson where did you get the info for the change, maybe it’s not correct? @Livnitup any help on this?
  16. Changing settings with Forscan for new H7 battery and get checksum error

    Shouldn't Need to make the checksum change. It will automatically fix. FORScan tutorial is here: https://docs.google.com/document/d/1-
  17. Heated Steering Wheel Retrofit - updated with information

    Try the search icon…. Works pretty good.
  18. 1/2 or 3/4 Impact Wrench?

    A good 1/2 impact will do the job. This is what I use and it will break shit if your not careful. https://www.amazon.com/gp/product/B08P4NX77N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
  19. AirLift 25980EZ

    I have the Air Lift 73000EZ WirelessAIR Control System App Only, No Controller with EZ Mount and Air Lift 88355 LoadLifter 5000 Ultimate Air Suspension Kit and love it. I did have problems with leaks in the beginning but my airlines weren't fully seated. System holds air fine, haven't...
  20. ECU module programming guide using FDRS

    Until you draw more amps than the Power Supply was designed for, voltage drops, system goes to sleep. Start the process over.......


Top