Sponsored

Search results

  1. LED projector upgrades

    That’s awesome! is the knob just a potentiometer? So then for the air bag idea you could use the front static signal as the reference and have the system air up the bags until it’s back to “level” with where ever you had the knob set before the load was added? I am interested in the auto level...
  2. Front End Friday with STX Styled Lower Bumper Grille

    I will apologize on my end. I was wrong to assume you were referring to stx grills. From the way your first post was worded it read to me as if you cut up STX grilles and were intentionally deceiving everyone. I will chalk this up as lesson learned on my end, and ask more questions first, and...
  3. LED projector upgrades

    That’s nice! Great Idea! Do you have problems with the other sensor not being in place?
  4. Front End Friday with STX Styled Lower Bumper Grille

    I just think when you say you took 2 grills to craft into one lower grille to match the stx grill but you really just bought a raptor grille and fitted it in place it’s not right. This forum is supposed to be a helpful community to share ideas and help others with modding and fixing their...
  5. LED projector upgrades

    That sounds awesome keep me in the loop on that!
  6. LED projector upgrades

    Oh ok so you used the sensor as a knob and took the arm off of it?
  7. LED projector upgrades

    I am Very interested in this! What did you use for the knob? Is it wired into the HCM? Pics?
  8. Front End Friday with STX Styled Lower Bumper Grille

    The pattern does not match the stx grille. There is no way you made that lower piece from two stx grills. Plus two STX grilles would cost around $1400 why would anyone cut up $1400 worth of grills to make this tiny lower piece. This looks like the lower grille from a raptor that is zip tied in...
  9. What did you do TO your F-150 today? 🙋🏻‍♂️

    This looks amazing! How did you make it?
  10. What did you do TO your F-150 today? 🙋🏻‍♂️

    Raptor projector Headlight swap, with harness from Ryan, added level sensors to make fully operational. And amber fogs are aftermarket from eBay.
  11. LED projector upgrades

    The color matches really well. https://www.ebay.com/itm/166555539766?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=td1uywybsja&sssrc=4429486&ssuid=KzfWrhsdSV6&var=&widget_ver=artemis&media=COPY
  12. What did you do TO your F-150 today? 🙋🏻‍♂️

    Changed out fogs for amber DRL fogs.
  13. LED projector upgrades

    Update I finally swapped out my fogs with amber DRL ones from eBay and they actually look really good.
  14. Glare free not working: 302a XLT upgraded to Projectors w/ HCM

    You just need level ground preferably dark enough to see the headlights, park the truck start the headlight alignment procedure under the procedures tab. If it says the sensors are out of range you might have to adjust them. If they are in factory location you should not have to unless it is...
  15. Glare free not working: 302a XLT upgraded to Projectors w/ HCM

    I ordered through ford parts direct I have a wholesale account so not sure from tasca. But the part numbers I supplied from ford come with everything the bracket rod and sensor. You will need some metric bolts m8x18 flange bolt to bolt to the A arm and m10 flange bolts and m10 spring clip nut...
  16. Glare free not working: 302a XLT upgraded to Projectors w/ HCM

    You only need to do the sensors on the drivers side so 1 of each, you need 2 mx64 connectors each are 3 wire do you would need 6 of those pins and 6 HCM pins but maybe get a couple extra in case one gets messed up while crimping. All wires go to HCM there will be 3 to front and 3 to back power...
  17. Glare free not working: 302a XLT upgraded to Projectors w/ HCM

    538-34736-2001-CT (mx64 connector pin for level sensor) 538-31403-3100 (mx64 connector for level sensors) 22awg M22759/32 Tefzel wire from prowireusa.com whatever colors you like just get 6 different about 25 feet of each color is more then enough. 538-560023-0421-LP (HCM Pins) ML3Z-3C097-B...
  18. Glare free not working: 302a XLT upgraded to Projectors w/ HCM

    I have part numbers let me look for it and I will post them up.
  19. Glare free not working: 302a XLT upgraded to Projectors w/ HCM

    I went inside the rail from the sensor until I got to the fuel tank then went over to the outside and kept it up top, taped it into some existing wire harness, then went into the grommet on diver side footwell.
  20. Official Lowered F150s w/ Wheels & Tires Photos Thread

    It looks so good! Any pics of the front and front angle?


Top