Sponsored

Search results

  1. Dee Zee DZ701 Under Seat Storage Drawer Good or Bad

    Wow, once the video gets to the other side of the truck you can see the tracks eating the plastic guides and at least one rivet plain missing. Is anyone aware of a similar solution that doesn't seem so poorly built? I really love the concept, BuiltRight or somebody should jump on this.
  2. Roll-N-Lock Issue

    Is there a nest or perch above your normal parking areas? Looks like bird poop that has since been washed off but it was left long enough to erode the finish and start oxidizing the aluminum slats.
  3. Our coyote build thread.

    Yep, it reads vacuum in inHg until positive boost is present, then kicks over to PSI. This all happens instantly though, I'll record it but here is a quick clip. This is actually my 3rd P3 gauge over the years, they are big in the euro scene and I was happy to see they support our trucks. The...
  4. Our coyote build thread.

    Got the P3 analog boost gauge installed. I ordered the bare kit as opposed to having them include the vent pre-assembled. Assembly was very easy, took 20 minutes max. Total install was about 2 hours but I'm OCD about wiring/zip-tying stuff. With a 10% off coupon code I had everything for under...
  5. Highest Supercharged Mileage

    I'm running the vortech kit with ID 1050s & VMPs PnP pump voltage booster and during the first tune iteration my idle was rough and low after pressing the gas or coming to an abrupt stop. All else was fantastic, just the choppy idle. It never stalled but did drop low enough to where I thought it...
  6. Web Browser exists in Sync4 natively. Just not user launch enabled.

    Sync being on android means it’s running the full chromium package natively. I suspect the firmware has a web UI for technician access in certain scenarios. If you have access to an address bar see what is running on localhost
  7. Corsa Sport Mid Exit 5.0 installed - sound clip video

    Hit up @beefcake, got me a great deal and lightning fast shipping, I think I ordered it Thursday afternoon and had it Saturday morning (shipped free).
  8. Corsa Sport Mid Exit 5.0 installed - sound clip video

    Right on, thanks for the heads up folks!
  9. Corsa Sport Mid Exit 5.0 installed - sound clip video

    Just wanted to post a quick photo and video clip of the Corsa Sport Mid-Exit on the 5.0. Great fitment, packaging and loving the sound. Zero drone detected at all.
  10. Our coyote build thread.

    Got the Corsa Sport Mid-Exit (before the tire) mounted. Packaging & quality is fantastic, fitment is dead-on and it sounds great. I've just installed it today but was able to cruise on up through 90 and zero drone. This is my first Corsa exhaust, I suspected the zero-drone reviews were...
  11. Vortech V3-SI Beefcake Supercharger Kit Installed on 2023 F150 XLT

    Nah, not concerned. According to the logs on the pull I’m seeing 11° of timing, our town is <1200 pop. and in general we don’t move a lot of fuel, going to wind this tank down and get better 93 in town. With so much timing being pulled it’s no wonder. I’m kind of kicking myself for not thinking...
  12. Vortech V3-SI Beefcake Supercharger Kit Installed on 2023 F150 XLT

    No idea but based on the average of 4 clips & posts I've found, it has conservatively picked up about 120hp & 50lb/ft so far. Looking forward to a few more iterations, I head back Thursday.
  13. Vortech V3-SI Beefcake Supercharger Kit Installed on 2023 F150 XLT

    Posted on my build thread but figured I'd drop the dyno here as well. Numbers came in at 469/442. Logs sent to Josh at 5 Star, hoping to get another revision or two before I head back later next week. I'd like to get a good 90 or better out of it while still on the base pulley. It was very...
  14. Our coyote build thread.

    Had a dyno session this morning. Numbers are low at 469/442 at the wheel but the runs were extremely consistent and it sounded healthy. This is 5th gear on up to 7k on the standard pulley, 3.73 rear. Picked up a good bit from average DJ stock runs but I'm hoping we can pull another 80-90 out of...
  15. Opinions Wanted

    Mine is a SCREW 4x4 5.0 w/ the 3.73 rear. I'm surprised your only getting 16mpg. Post supercharger install I'm averaging 15.6 and thats with a ton of hooning around and data logging in tow and sport modes. You didn't mention if you're lifted on heavier wheels and tires or not. Are you? If so...
  16. Vortech V3-SI Beefcake Supercharger Kit Installed on 2023 F150 XLT

    Here is a photo of the MaxFlow Diverter (as opposed to the MaxFlow Race BOV) with the optional filter. This is what I'd consider a perfect balance between great sound that doesn't feel obnoxious or intrude too much on the rest of the driving experience. I opted for the race version originally...
  17. Sold my Jeep Gladiator and bought a Ford F-150 build.

    On the Jeep KMC Roswell powder coated to match the sarge green, 35x12.5R17 in that shot with the muds. On the F150, Brink Venom with a 275x60R20. Here is the post I had created when I got them...
  18. Sold my Jeep Gladiator and bought a Ford F-150 build.

    Very nice truck, I too recently sold our diesel (deleted & tuned) Gladiator. I had long missed the coyote after a few mustangs and I'm happy to be back behind one. The only thing I miss about the gladiator is the beefier everything despite being a mid-size truck. I'm fairly certain I could break...
  19. 2021+ Gauge Pod Options

    Hey folks, it seems we are pretty limited from a gauge pod standpoint so I wanted to list what I've found and see if anyone else is aware of anything out there. I'm looking for a classic a-pillar, steering console or even top center storage location pod. I've seen a GT500 pod retrofit but...
  20. Electric Fridge in F150?

    We have a Dometic CFX3-75, it has dual-zone fridge/freezer that we run off our EcoFlow delta. The delta is charged via solar panel while camping, then 12v A/C while on the road. I'm hoping Cascadia 4x4 offers nice hood panels and a solar controller like they do for our recently sold Jeep...


Top