What did you do TO your F-150 today? 🙋🏻‍♂️

[jwgreene]

Added an Aeroskin II textured to the Leadfoot.

I need to see more pics of this on the leadfoot.

Sponsored

 

[currybob]

Has anyone lowered the rear by just removing the block on the rear axle?? I'd like to level it more but don't want to spend anything doing it.

 

[BubbaDinks]

I need to see more pics of this on the leadfoot.

I will take some more and post.

 

[emsmedic31]

Had it washed, waxed, and ceramic coated. Won’t stay this clean during duck season, lol

 

[BubbaDinks]

I need to see more pics of this on the leadfoot.

I will take some more and post.

Here are a few extra. Hope this helps.

 

[Zyvin]

Has anyone lowered the rear by just removing the block on the rear axle?? I'd like to level it more but don't want to spend anything doing it.

Not yet. I may try over the 4th weekend and see how I like it. I would like to get some new U bolts and nuts though as I would rather replace vs reuse (cause I’m anal).

Here is the torque and sequence if anyone needs it.

 

[currybob]

Not yet. I may try over the 4th weekend and see how I like it. I would like to get some new U bolts and nuts though as I would rather replace vs reuse (cause I’m anal).

Here is the torque and sequence if anyone needs it.

I'm with you on the replacing the U bolts!

Will you post results when you finish. I'm mechanical enough to be dangerous sometimes but would love to see photos before and after of the ride height. It looks like a very easy simple job but don't want to mess anything up.

Would also like to know if it effected the ride at all.

 

[Bills]

Re-calibrated my speedo for the new tires with forscan.

 

[Chewza]

Finally received the truck which means the first thing to do is put the dashcam in because Virginia drivers are god awful...

Wrote up the entire hardwiring process here...
Blackvue DR900s-2CH Dashcam + Power Magic Pro Hardwire Install | F150gen14.com -- 2021+ Ford F-150, Lightning EV, Raptor Forum (14th Gen)

 

[Hudnut]

Has anyone lowered the rear by just removing the block on the rear axle?? I'd like to level it more but don't want to spend anything doing it.

I did this on my 2015. it looked great and was super simple. reused the same u bolts. had 100k on it with no issues.

 

[currybob]

I did this on my 2015. it looked great and was super simple. reused the same u bolts. had 100k on it with no issues.

I thinking real serious about doing this, is the spacer glued in or do you just push it out after the bolts a loosened?

 

[Knickell]

Not my photo/post, but here is a handy dandy use for that upper glove box. To store your drinky drinks ? (UNTIL you get home!)!

 

[johnatuckeriii]

Swapped the 18s for 20” platinum wheels… well; not literally platinum but certainly from that trim level.

 

[Mike505]

Put the ReadyLift 2” level on my KR PB and BFG KO2s in 285/65/20

 

[Mike Smith]

Removed the 32” ski pole antenna and replaced with 6.5” stubby.

Sponsored