What did you do TO your F-150 today? 🙋🏻‍♂️

[Jus Cruisin]

Where did you get them, did it help with wind noise? How hard to install?

They have no help with noise of any kind as far as I can tell. They are OEM Ford parts and took maybe 10 minutes to install.

Sponsored

 

[Jus Cruisin]

Polished the "B" pillars yesterday. Used a Porter Cable with a 5" pad and some compound I had laying around. Then spray on hybrid ceramic coating.

 

[nsbreeding]

Where did you get them, did it help with wind noise? How hard to install?

I saw a youtube video on installing the OEM Ford ones and it looked easy, I wondered if it created any wind noise, it seems I saw someone say they had installed husky wheel well liners and it created some wind noise. With them being Ford's, I would think they are a tighter fit. I am considering them to "hide" the sliver in my back wheel wells.

 

[SpaceWhiteF150]

I pulled the bumper off and pulled out the assembly’s. Laminex claims it can be done without but I don’t think I could have wrapped them as well.
Honestly when fogs are lit up they sort of have a green hue if looking at them, but the omitting light is defiantly amber.
While only the running lights are lit they still look amber.

How did you remove your bumper?

 

[Doyouevenboost]

SpaceWhiteF150

[/QUOTE]
I posted the workshop manual removal procedure in this thread
https://www.f150gen14.com/forum/threads/2021-f150-lariat-502a-bumper-removal.5379/#post-93652

 

[SpaceWhiteF150]

SpaceWhiteF150

I posted the workshop manual removal procedure in this thread
https://www.f150gen14.com/forum/threads/2021-f150-lariat-502a-bumper-removal.5379/#post-93652


Thanks

 

[OnceAnEagle]

Installed BD Trims domed Matt Black tailgate inserts. Followed directions and no worries. Pre-heated the inserts with a heat gun before peeling the backing because the 3M glue wants to come off along the edges as you peel back. Just take your time.

 

[OnceAnEagle]

Polished the "B" pillars yesterday. Used a Porter Cable with a 5" pad and some compound I had laying around. Then spray on hybrid ceramic coating.

Looks great! Have you seen this Backroad Driver video for self-healing PPF pillar film? Thinking about ordering it.

 

[Jus Cruisin]

Looks great! Have you seen this Backroad Driver video for self-healing PPF pillar film? Thinking about ordering it.

Because I have the ability to "fix" the B pillars for free, basically, I'll just do what I've done on them in the past.
I'm sure the appliques are fine but I have the Porter Cable out often enough to spiff up the rest of the paint I don't see the need personally.

 

[Mike D]

Took that ridiculous air dam and motors off, trimmed it up, put electrical tape on wires and secured them with wire ties. Clean look and don't have to worry about it malfunctioning/bending while off road in the mountains!

 

[cadefns]

Finally gave it a wash ?

 

[KwitcherBitchin]

Gave it an overdue wash and wax

 

[imnuts]

On Friday, I brought home a cable spool from work to use as a table in the backyard. After driving home, I feel like the truck needs 3-400 lbs in the bed all the time. The ride was smoother with the weight there than empty, fuel economy was unaffected.

Saturday, filled the bed with flowers and pumpkins for the wife. This probably would have taken 2 trips before we got the truck.

 

[Chease44]

Big day today….picked up my truck and went straight home. Installed: wheel well liners, splash guards, Bak Revolver X4S, removed the 4x4 decals.

 

[desertlivin]

Installed a Built Right bedside rack system along with my roll-up bed cover. This is specifically made to accommodate the new onboard power pro. The drum from the bed cover diminishes the full value a little bit with the bed canister covering the front, but I will still get good use out of it.

Sponsored